5 February 2008 Making bulk-conductive glass microchannel plates
Author Affiliations +
The fabrication of microchannel plate (MCP) with bulk-conductive characteristics has been studied. Semiconducting clad glass and leachable core glass were used for drawing fibers and making MCP. Co-axial single fiber was drawn from a platinum double-crucible in an automatic fiberizing system, and the fibers were stacked and redrawn into multifiber by a special gripping mechanism. The multifibers were stacked again and the boule was made and sliced into discs. New MCPs were made after chemically leaching process without the traditional hydrogen firing. It was shown that bulk-conductive glass MCP can operate at higher voltage with lower noise.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jay J. L. Yi, Lihong Niu, "Making bulk-conductive glass microchannel plates", Proc. SPIE 6890, Optical Components and Materials V, 68900E (5 February 2008); doi: 10.1117/12.762159; https://doi.org/10.1117/12.762159


Research of ion feedback-induced noise of micro-channel plate
Proceedings of SPIE (September 02 2014)
Effect of the OH ions on SiO2 SPG SiO2 InSb...
Proceedings of SPIE (October 07 1994)
Ion-induced luminescence of silica glasses and optical fibers
Proceedings of SPIE (December 30 2003)
Fabrication of a bulk conductive glass microchannel plate
Proceedings of SPIE (August 18 2011)
OSEE As The Method Of Determining Of Defect Degree For...
Proceedings of SPIE (November 10 1986)

Back to Top