12 February 2008 Bio-signal processing using a novel lock-in detection technique for the portable bio-optical systems
Author Affiliations +
Abstract
Portable bio-optical systems have required not only small size but also high sensitive and precise detection technique. To achieve high sensitivity, portable bio-optical systems should be set up to minimize the effects of noises such as Johnson noise, 1/f noise, shot noise etc. In order to reduce the influence from these noises, we have applied a novel lock-in detection technique. The lock-in detection technique is able to effectively suppress these noises as choosing a frequency high enough to avoid 1/f noise and low enough to avoid parasitic noises occurred on high frequency. We use lock-in detection technique with a simple structure - several op-amplifiers and MOSFETs. Using the lock-in scheme, we recovered signals in the presence of overwhelming background noises without applying multistage amplifiers and filters. This technique provides high resolution measurements of relatively clean signals over several orders of magnitude and frequency by compared with conventional detection method. We have demonstrated portable bio-optical system using infrared LED and PD with our hybrid type lock-in detection module.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
In-Il Jung, In-Il Jung, Doo Gun Kim, Doo Gun Kim, Woon-Kyung Choi, Woon-Kyung Choi, Do-Gyun Kim, Do-Gyun Kim, Young-Wan Choi, Young-Wan Choi, } "Bio-signal processing using a novel lock-in detection technique for the portable bio-optical systems", Proc. SPIE 6897, Optoelectronic Integrated Circuits X, 689713 (12 February 2008); doi: 10.1117/12.762998; https://doi.org/10.1117/12.762998
PROCEEDINGS
9 PAGES


SHARE
Back to Top