Paper
29 January 2008 Three-guide coupled rectangular ring lasers with total internal reflection mirrors
Author Affiliations +
Abstract
The lasing characteristics of three-guide coupled ring lasers using the self-aligned total internal reflection (TIR) mirrors were investigated numerically and experimentally. The rectangular laser cavity consists of four low loss TIR mirrors and an output coupler made out of passive three coupled waveguides. Two different lasers having active section lengths of 250 and 350 μm and total cavity lengths of 580 and 780 μm are fabricated. For both devices lasing thresholds of 38 mA is obtained at room temperature and under CW operation. Lasing is predominantly single mode with the side mode suppression ratio better than 20 dB.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Doo Gun Kim, Woon Kyung Choi, In-Il Jung, Geum-Yoon Oh, Young Wan Choi, Jong Chang Yi, and Nadir Dagli "Three-guide coupled rectangular ring lasers with total internal reflection mirrors", Proc. SPIE 6909, Novel In-Plane Semiconductor Lasers VII, 69090D (29 January 2008); https://doi.org/10.1117/12.762030
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Mirrors

Resonators

Output couplers

Continuous wave operation

Directional couplers

Etching

RELATED CONTENT

Crystals for lasers with diode pump
Proceedings of SPIE (March 11 1996)
Compact hybrid Si microring lasers
Proceedings of SPIE (February 12 2010)
Semiconductor ring lasers
Proceedings of SPIE (May 02 1994)

Back to Top