21 March 2008 EUV mask inspection tool using high NA DUV inspection tool
Author Affiliations +
Proceedings Volume 6921, Emerging Lithographic Technologies XII; 692123 (2008); doi: 10.1117/12.773145
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States
Abstract
A new inspection system with DUV laser beam and high NA optic for EUV mask has been developed to inspect defects on EUV blank mask and defects by process and handling. The development of new reflective image and optics has increased inspection speed on EUV mask before absorber etch and after absorber etch. Defect classification and operation has increased the productivity of inspection and particle control on EUV mask process. With this new inspection system, defects on blank mask, after resist develop and after etch processed mask were classified and evaluated to install EUV mask process. And defect sensitivities according to various pattern size and process steps were evaluated with required defect size of simulated printing effect on wafer. Designed defect pattern of 46nm node were prepared. Blank masks from Hoya were used. Patterns were exposed using 50KeV electron beam writer. After resist develop, patterns with program defect were inspected. After absorber etching, defects were inspected and evaluated. According to sub film, inspection condition was optimized. Using simulation tool, defects printability were simulated and compared with sensitivity of this inspection tool. Our results demonstrate that this inspection tool is very effective to detect and identify defects and their sources on EUV mask process. In this paper, mask inspection performance of high NA, DUV optic with short working distance was evaluated and described on programmed EUV mask.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongkyoo Choi, Sunghyun Oh, Munsik Kim, Yongdae Kim, Changreol Kim, "EUV mask inspection tool using high NA DUV inspection tool", Proc. SPIE 6921, Emerging Lithographic Technologies XII, 692123 (21 March 2008); doi: 10.1117/12.773145; https://doi.org/10.1117/12.773145
PROCEEDINGS
8 PAGES


SHARE
KEYWORDS
Inspection

Photomasks

Extreme ultraviolet

Deep ultraviolet

Reflectivity

Defect inspection

Extreme ultraviolet lithography

RELATED CONTENT

Overview of SEMATECH's EUVL program
Proceedings of SPIE (June 16 2005)
NGL masks: development status and issue
Proceedings of SPIE (April 01 2011)
Pattern inspection of EUV masks using DUV light
Proceedings of SPIE (December 27 2002)
Defect printability and inspection of EUVL mask
Proceedings of SPIE (December 06 2004)
Combined absorber stack for optimization of the EUVL mask
Proceedings of SPIE (March 23 2006)

Back to Top