Applications of TM polarized illumination

Bruce Smith; Jianming Zhou; Peng Xie

doi:10.1117/12.775739

12 March 2008 Applications of TM polarized illumination

Bruce Smith, Jianming Zhou, Peng Xie

Author Affiliations +

Proceedings Volume 6924, Optical Microlithography XXI; 69240J (2008) https://doi.org/10.1117/12.775739
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States

Abstract

The use of transverse electric (TE) polarization has dominated illumination schemes as selective polarization is used for high-NA patterning. The benefits of TE polarization are clear - the interference of diffracted beams remains absolute at oblique angles. Transverse magnetic (TM) polarization is usually considered less desirable as imaging modulation from interference at large angle falls off rapidly as the 1/cosθ. Significant potential remains, however, for the use of TM polarization at large angles when its reflection component is utilized. By controlling the resist/substrate interface reflectivity, high modulation for TM polarization can be maintained for angles up to 90° in the resist. This can potentially impact the design of illumination away from most recent TE-only schemes for oblique imaging angles (high NA). We demonstrate several cases of TM illumination combined with tuned substrate reflectivity for 0.93NA, 1.20NA, and 1.35NA and compare results to TE and unpolarized cases. The goal is to achieve a flat response through polarization at large imaging angles. An additional application of TM illumination is its potential use for double patterning. As double patterning and double exposure approaches are sought in order to meet the needs of 32nm device generations and beyond, materials and process engineering challenges become prohibitive. We have devised a method for frequency doubling in a single exposure using an unconventional means of polarization selection and by making use of the reflective component produced at the photoresist/substrate interface. In doing so, patterns can be deposited into a photoresist film with double density. As an example, using a projection system numerical aperture of 1.20, with water as an immersion fluid, and a conventional polyacrylate 193nm photoresist, pattern resolution at 20nm half-pitch are obtainable (which is 0.125lambda/NA). The process to transfer this geometry into a hardmask layer uses conventional materials, including the photoresist layer and thin film silicon oxide based materials.

Citation Download Citation

Bruce Smith, Jianming Zhou, and Peng Xie "Applications of TM polarized illumination", Proc. SPIE 6924, Optical Microlithography XXI, 69240J (12 March 2008); https://doi.org/10.1117/12.775739

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE