You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
28 December 2007The manufacturing of polarization optical fibres
The method of polarization fibres manufacturing and the results of geometrical measurements of obtained optical fibres are
presented. The essential aspect of examinations is the analysis of the influence of technological parameters on geometrical
measurements of obtained polarization fibres. In the frames of present work made were four structures of optical fibres: type
of side-hole with elliptical core and the completely new structure, not examined theoretically still and not realised practically
yet, named AZ-K7 with rectangular stress elements and with classical core.
Agnieszka Zadykowicz andDominik Dorosz
"The manufacturing of polarization optical fibres", Proc. SPIE 6937, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2007, 69371D (28 December 2007); https://doi.org/10.1117/12.784683
The alert did not successfully save. Please try again later.
Agnieszka Zadykowicz, Dominik Dorosz, "The manufacturing of polarization optical fibres," Proc. SPIE 6937, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2007, 69371D (28 December 2007); https://doi.org/10.1117/12.784683