Paper
28 December 2007 The use of parallel computations in a 2-D numerical simulation of non-stationary thermal field in a cylindrical wire
Jerzy Gołebiowski, Robert Piotr Bycul
Author Affiliations +
Proceedings Volume 6937, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2007; 693746 (2007) https://doi.org/10.1117/12.784893
Event: Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2007, 2007, Wilga, Poland
Abstract
The non-stationary temperature distribution in a 2-D cross-section of a cylindrical copper wire with insulation was investigated. The wire was conducting direct current of a constant value. The Hankel boundary condition modelling convectional cooling was applied. The convective heat transfer coefficient was assumed to be a function of the angle coordinate in the cylindrical coordinate system. The heat transfer equation was discretized in space and time domain with the use of the implicit FDM. For each discrete value in the time domain the solution of the resulted system of algebraic equations was determined by a parallel conjugate gradient method. The results of the simulation were compared to those obtained from a commercial software package: EMRC Nisa. The comparison showed good agreement between the results. All the results and the comparison are presented in the paper along with the comments and conclusions.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jerzy Gołebiowski and Robert Piotr Bycul "The use of parallel computations in a 2-D numerical simulation of non-stationary thermal field in a cylindrical wire", Proc. SPIE 6937, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2007, 693746 (28 December 2007); https://doi.org/10.1117/12.784893
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fused deposition modeling

Computing systems

Finite element methods

Differential equations

Numerical simulations

Parallel processing

Copper

Back to Top