Paper
14 January 1987 Tracking Servo For Small Size Optical Disk System.
H. Inada, T. Nomura, T. Iwanaga, K. Koumura
Author Affiliations +
Abstract
This paper describes a tracking servo system developed for a small size optical disk system. In this tracking servo system, new techniques, such as two stage servo system and tracking error integration memory, are applied for improving track access time and data transfer rate. The two stage tracking servo system has a unique position detector, which outputs a lens position error signal relative to the optical head. Using this detecting signal, the objective lens and the optical head are controlled co-operatively. Therefore direct track access from the current track to the target track is achieved without lens vibration. Also, average track access time is reduced. The tracking error integration memory integrates track error signal synchronized with disk rotation. This memory output signal is equivalent to track eccentricity after several disk rotations. Therefore, a tracking servo system with this tracking error integration memory can achive highly accurate track following even under highspeed disk rotation and large track eccentricity. As a result, disk rotation speed can be upped and data transfer rate can be improved.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. Inada, T. Nomura, T. Iwanaga, and K. Koumura "Tracking Servo For Small Size Optical Disk System.", Proc. SPIE 0695, Optical Mass Data Storage II, (14 January 1987); https://doi.org/10.1117/12.936827
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Servomechanisms

Optical tracking

Signal detection

Sensors

Head

Objectives

Optical discs

RELATED CONTENT

Measuring Method Of Optical Disk Mechanical Characteristics
Proceedings of SPIE (January 14 1987)
Servo And Clock Sampling In The Optimem 1000
Proceedings of SPIE (April 12 1985)
Interlinked Tracking Servo Technology
Proceedings of SPIE (January 14 1987)

Back to Top