Paper
10 December 1986 Efficient Decimation And Interpolation
Kou-Hu Tzou, Sharaf E. Elnahas, Chun-Huan Wang
Author Affiliations +
Abstract
In some digital image processing systems, input images may be oversampled or only the low-pass content of the image will be retained due to some processing such as data compression. Therefore, input signals can be decimated to a lower sampling rate, processed at that low rate, and interpolated back to the same input rate or other desired rates. This approach allows performing the required processing on the size-reduced signals and may save significant computation time. In another application, decimation and interpolation are required to enlarge or reduce the size of the digital image to fit that of a display device. For high-ratio decimation and interpolation, the multistage approach is more computationally efficient than the one-stage approach. In this paper, the optimal multistage implementation of decimation and interpolation is derived for digital image processors of various arithmetic environments. The theoretically derived optimal multistage decomposition is then verified by comparing it against numerical results and is found to be valid for a wide range of decimation ratios.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kou-Hu Tzou, Sharaf E. Elnahas, and Chun-Huan Wang "Efficient Decimation And Interpolation", Proc. SPIE 0697, Applications of Digital Image Processing IX, (10 December 1986); https://doi.org/10.1117/12.976204
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Image processing

Finite impulse response filters

Digital image processing

Optical filters

Signal processing

Convolution

Nickel

Back to Top