23 April 2008 High-transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator
Author Affiliations +
Abstract
This paper describes the design, modeling, fabrication and characterization of single-row photonic crystal multiple micro-cavity structures embedded in 500 nm photonic wire waveguides. The strength of coupling between the resonators and the free spectral range (FSR) between the split resonance frequencies of the coupled-cavity combination were controlled via the use of different numbers of periodic hole structures - and through the use of different aperiodic hole taper arrangements between the two cavities in the middle mirror section of the mirrors. Both 2D and 3D finite-difference time-domain (FDTD) computations have been used to simulate the device structures. Comparisons have been made with the results of measurements and show good agreement.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ahmad Rifqi Md Zain, Ahmad Rifqi Md Zain, Nigel P. Johnson, Nigel P. Johnson, Richard M. De La Rue, Richard M. De La Rue, } "High-transmission 1D photonic crystal/photonic wire multiple cavity structures based on silicon-on-insulator", Proc. SPIE 6989, Photonic Crystal Materials and Devices VIII, 69891A (23 April 2008); doi: 10.1117/12.780417; https://doi.org/10.1117/12.780417
PROCEEDINGS
8 PAGES


SHARE
Back to Top