8 May 2008 GaSb-based VECSEL exhibiting multiple-watt output power and high beam quality at a lasing wavelength of 2.25 μm
Author Affiliations +
Abstract
We report the realization of GaSb-based optically pumped vertical-external-cavity surface-emitting lasers (VECSELs) emitting at 2.25 μm which are capable of multiple-Watt output power. VECSEL structures were grown on GaSb-substrates by molecular beam epitaxy. SiC heat spreaders were capillary bonded onto the surface of the VECSEL chip in order to facilitate efficient heat removal. A continuous-wave output power of more than 3.4 W was recorded at a heat sink temperature of -10 °C. At room temperature (20 °C) we still obtained more than 1.6 W output power. A beam propagation factor in the range of M2≤5 was measured at maximum output power. In adjusting the fundamental mode diameter on the VECSEL chip to the pump spot diameter the beam quality could be further improved resulting in a beam propagation factor of M2~1.5. Furthermore, initial results on a GaSb-based dual-chip VECSEL are reported, capable of delivering a maximum output power of 3.3 W for a heat sink temperature of 20 °C and an emission wavelength of 2.25 μm.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. Rösener, B. Rösener, N. Schulz, N. Schulz, M. Rattunde, M. Rattunde, C. Manz, C. Manz, K. Köhler, K. Köhler, J. Wagner, J. Wagner, } "GaSb-based VECSEL exhibiting multiple-watt output power and high beam quality at a lasing wavelength of 2.25 μm", Proc. SPIE 6997, Semiconductor Lasers and Laser Dynamics III, 699702 (8 May 2008); doi: 10.1117/12.781143; https://doi.org/10.1117/12.781143
PROCEEDINGS
13 PAGES


SHARE
Back to Top