This PDF file contains the front matter associated with SPIE Proceedings Volume 7000, including the Title Page, Copyright information, Table of Contents, Introduction, and the Conference Committee listing.

In this contribution, we present a new approach aimed to achieve superresolution in digital holographic microscopy that overcomes the limitations imposed by the Abbe's diffraction limit. Based on time multiplexing and off-axis illumination, a common-path interferometric architecture allows the synthesis of an enlarged aperture that expands the cutoff frequency of the conventional imaging system. Complex object amplitude distribution is recovered using an extremely simple phase-shifting configuration instead of image plane off-axis holographic recording. As a consequence, the setup becomes easy-to-configure (less requirements and lower number of optical elements) and it is useful for practical implementation in microscopes while only simple modifications are required (no higher magnifications are needed to resolve the interference pattern at the CCD plane). Experimental results validating the capabilities of the presented approach when a low numerical aperture commercial microscope objective is used as imaging lens are included using both a synthetic object (high resolution USAF test target) and a biosample (red blood cells) as objects under test.

The nature of digital hologram's allows for the implementation of segmentation process' using volumes of reconstructions as their input, where each reconstruction in the volume is a reconstruction at a different focal plane. Our segmentation technique utilizes extracted focus and shape information. In the case of digital hologram's encoding macroscopic objects, this information is generally obtained using data extraction algorithms applied to a volume of reconstructions. We have developed a three stage segmentation algorithm for macroscopic objects encoded in digital hologram's. This algorithm uses a depth-from-focus technique applied to a set of numerical reconstructions from a single perspective of the digital hologram to extract focus and shape information in the form of a depth map and a maximum focus map. First we estimate the degree of focus at each coordinate. We then calculate a depth map of the scene and segment all object coordinates from background coordinates in the second stage. Finally in the third stage, we perform the segmentation of a digital hologram's reconstruction into independent objects or object regions. A segmentation image is created through applying histogram and image processing algorithms to the depth map. We present results of applying our technique to digital hologram's containing single and multiple macroscopic objects.

The application of phase-only input data pages has several advantages with respect to conventional amplitude modulated holographic storage: It avoids the saturation of the storage material by providing a smooth Fourier plane, improves the response in associative read-out, increases the light efficiency of the recording object wave and provides the opportunity of data encryption. However, if the information is carried by the phase of object wave front recovery of the data from the reconstructed beam is problematic with simple intensity sensitive devices as a CCD camera. To solve this problem we propose a compact phase to amplitude data page conversion method and apply it to the output of a Fourier holographic data storage system. The phase to amplitude conversion uses a birefringent crystal to generate two equal intensity copies of the reconstructed data page that are geometrically shifted by an integer number of pixels with respect to each other each other. The interference of these two phase modulated images is projected on the detector field of the camera. The interference pattern contains low and high intensity pixels if the phases of the interfering pixels are opposite and identical respectively. Using proper data coding, the original data matrix recovered from the intensity pattern of the CCD. Fourier plane homogeneity, bit error rate and positioning tolerances of the proposed holographic storage method are investigated by computer modeling and a comparison is provided with amplitude modulated data pages.

Phase contrast imaging is a specific technique in optical microscopy that is able to capture the minute structures of unlabeled biological sample from contrast generated in the variations of the object's refractive index. It is especially suitable for living cells and organisms that are hardly visible under conventional light microscopy as they barely alter the intensity and only introduce phase shifts in transmitted light. Optical phase imaging provides sensitivity to measure optical path length (OPL) differences down to nanometers, which has great potential in biomedical applications from examining both topological and three-dimensional biophysical properties of cells and organisms. Conventional DIC microscopy with partially coherent light source is a very powerful technique for phase imaging, and is able to yield higher lateral resolution compared to other interferometric phase imaging methods. However, it is inherently qualitative and the information obtained is a phase-gradient image rather than a true linear mapping of OPL differences. This hinders its further application as it is difficult to infer the results directly. Work has been done previously to obtain the quantitative phase information out of DIC. However, some of these methods not only involves costly hardware modification but also complicated computation. Here we investigate another approach that combines the correlation of light intensity and phase with polarization-modulated differential interference contrast (DIC) microscopy. The required hardware modification is simple, and numerically solving the relationship of light propagation in a series of through-focus DIC images allows phase information to be restored from phase gradients in two-dimensional planes. Quantitative phase information in three-dimensional space can then be reconstructed from 3D rendering of the calculated phase images. Initial results of application in biological cells are also demonstrated.

In recent years the requirements of industrial applications relating to image processing have significantly increased. According to fast and modern production processes and optimized manufacturing of high quality products, new ways of image acquisition and analysis are needed. Here the industrial computer tomography (CT) as a non-destructive technology for 3D data generation meets this challenge by offering the possibility of complete inspection of complex industrial parts with all outer and inner geometric features. Consequently CT technology is well suited for different kinds of industrial image-based applications in the field of quality assurance like material testing or first article inspection. Moreover surface reconstruction and reverse engineering applications will benefit from CT. In this paper our new methods for efficient 3D CT-image processing are presented. This includes improved solutions for 3D surface reconstruction, innovative approaches of CAD-based segmentation in the CT volume data and the automatic geometric feature detection in complex parts. However the aspect of accuracy is essential in the field of metrology. In order to enhance precision the CT sensor can be combined with other, more accurate sensor systems generating measure points for CT data correction. All algorithms are applied to real data sets in order to demonstrate our tools.

Industrial inspection of micro-devices is often a very challenging task, especially when those devices are produced in large quantities using micro-fabrication techniques. In the case of microlenses, millions of lenses are produced on the same substrate, thus forming a dense array. In this article, we investigate a possible automation of the microlens array inspection process. First, two image processing methods are considered and compared: reference subtraction and blob analysis. The criteria chosen to compare them are the reliability of the defect detection, the processing time required, as well as the sensitivity to image acquisition conditions, such as varying illumination and focus. Tests performed on a real-world database of microlens array images led to select the blob analysis method. Based on the selected method, an automated inspection software module was then successfully implemented. Its good performance allows to dramatically reduce the inspection time as well as the human intervention in the inspection process.

We present a new method to automatically segment local defects in a woven fabric that does not require any additional defect-free reference for comparison. Firstly, the structural features of the repetition pattern of the minimal weave repeat are extracted from the Fourier spectrum of the sample under inspection. The corresponding peaks are automatically identified and removed from the fabric frequency spectrum. Secondly, we define a set of multi-scale oriented bandpass filters, adapted to the specific structure of the sample, that operate in the Fourier domain. The filter design is the key part of the method. Using the set of filters, local defects can be extracted. Thirdly, the filtered images obtained at different scales are inverse Fourier transformed, binarized and merged to obtain an output image where flaws are segmented from the fabric background. The method can be applied to fabrics of uniform color as well as to fabrics woven with threads of different colors. It is Euclidean motion invariant and texture adaptive and it is useful for automatic inspection both online and off-line. The whole process is fully automatic and can be implemented either optical or electronically. A variety of experimental results are presented and discussed.

In a first part, we discuss several properties that seem desirable for any type of wavelet, such as smoothness, orthogonality, local support, Riesz stability, or vanishing moments. Then we review the construction of the spherical continuous wavelet transform based on the stereographic projection. Next we turn to the discrete wavelet transform. We review the various existing constructions and compare them in the light of the requirements listed above. Finally, we briefly describe the continuous wavelet transform on a two-sheeted hyperboloid and give some hints concerning the case of a general conic section.

The decomposition of signals using the classical Daubechies wavelets can equivalently be described as a decomposition using a two channel filterbank with the scaling function corresponding to the low pass and the mother wavelet to the high pass channel. This classical two channel approach was extended to also comprise filterbanks with more than two channels, corresponding to one scaling function and two or more mother wavelets.¹ Although these newly found wavelets fitted in very well with the theory of the existing Daubechies wavelets, the frequency selectivity of the corresponding filterbank was in general not satisfying. We presented a new method² to improve the selectivity of the corresponding filterbank by introducing additional elementary building blocks in the design process, leaving the low pass filter and the polynomial degree of the impulse responses of the other filters of the filterbank untouched. In this paper we take the new method one step further and not only show how the improvement could be achieved but also what possibilities there are to modify the design and what patterns they adhere to. Furthermore we introduce a figure of merit of the total filterbank and its individual filters and show the improvements to the design process.

We propose a new method to address the problem of stereo matching under varying illumination conditions. First, a spatially varying multiplicative model is developed to account for photometric changes induced between both images in the stereo pair. The stereo matching problem based on this model is then formulated as a constrained optimization problem in which an appropriate convex objective function is minimized under convex constraints. These constraints arise from prior knowledge and rely on various properties of both disparity and illumination fields. In order to obtain a smooth disparity field while preserving discontinuities around object edges, we consider an appropriate wavelet-based regularization constraint. The resulting multi-constrained optimization problem is solved via an efficient block iterative algorithm which offers great flexibility in the incorporation of several constraints. Experimental results demonstrate the efficiency of the proposed method to recover illumination changes and disparity map simultaneously, making stereo matching very robust w.r.t. such changes.

If modern computers are sometimes superior to cognition in some specialized tasks such as playing chess or browsing a large database, they can't beat the efficiency of biological vision for such simple tasks as recognizing a relative or following an object in a complex background. We present in this paper our attempt at outlining the dynamical, parallel and event-based representation for vision in the architecture of the central nervous system. We will illustrate this by showing that in a signal matching framework, a L/LN (linear/non-linear) cascade may efficiently transform a sensory signal into a neural spiking signal and we apply this framework to a model retina. However, this code gets redundant when using an over-complete basis as is necessary for modeling the primary visual cortex: we therefore optimize the efficiency cost by increasing the sparseness of the code. This is implemented by propagating and canceling redundant information using lateral interactions. We compare the eciency of this representation in terms of compression as the reconstruction quality as a function of the coding length. This will correspond to a modification of the Matching Pursuit algorithm where the ArgMax function is optimized for competition, or Competition Optimized Matching Pursuit (COMP). We will particularly focus on bridging neuroscience and image processing and on the advantages of such an interdisciplinary approach.

Distributed video coding is a new video coding paradigm that shifts the computational intensive motion estimation from encoder to decoder. This results in a lightweight encoder and a complex decoder, as opposed to the predictive video coding scheme (e.g., MPEG-X and H.26X) with a complex encoder and a lightweight decoder. Both schemas, however, do not have the ability to adapt to varying complexity constraints imposed by encoder and decoder, which is an essential ability for applications targeting a wide range of devices with different complexity constraints or applications with temporary variable complexity constraints. Moreover, the effect of complexity adaptation on the overall compression performance is of great importance and has not yet been investigated. To address this need, we have developed a video coding system with the possibility to adapt itself to complexity constraints by dynamically sharing the motion estimation computations between both components. On this system we have studied the effect of the complexity distribution on the compression performance. This paper describes how motion estimation can be shared using heuristic dynamic complexity and how distribution of complexity affects the overall compression performance of the system. The results show that the complexity can indeed be shared between encoder and decoder in an efficient way at acceptable rate-distortion performance.

Using the scalable video coding (SVC) extension of the H.264/AVC video coding standard, encoding a video sequence yields a quality, resolution, and frame-rate scalable bit-stream. This means that a version of the video sequence with a lower resolution, quality and/or frame rate can be obtained by extracting selected parts of the scalable bit-stream, without the need for re-encoding. In this way, easy adaptation of the video material to the end-users' device (computational power and display resolution) and channel characteristics is possible. In this paper, the use of unequal error protection (UEP) for error-resilient transmission of H.264/SVC-encoded video sequences is studied. By using unequal error protection, graceful degradation of the video quality is achieved when the targeted packet loss probability is exceeded. In contrast, using equal error protection (EEP), an immediate and dramatic drop in quality is observed under these conditions.

In the present communication an extensive study of lossless and lossy compression of laser confocal microscopy images is conducted. For the lossy (irreversible) case, both objective and subjective results are given. It is shown that the JPEG2000 compression standard outperforms all others, even the recently introduced HD Photo, in both the reversible and irreversible cases. More specifically, the JPEG2000 lossless performance is approximately 15% better than the next best image data compression algorithm tested (namely the PNG) and the JPEG2000 lossy compression objective performance results are at least 3dB better than that of HD Photo or JPEG.

Typically, in many situations, image quality assessment requires a reference or "ground truth" image to provide a quantitative measure. Popular quality measures such as the Peak Signal Noise Ratio (PSNR) or simply the Root Mean Squared Error (RMSE) are simple to calculate, but it is well known that they are not always well correlated with the perceived visual quality. Provided that a reference image is not always available, other blind quality assessment methods have been proposed to achieve a measure of the image quality assessment. In this paper, a new self-contained logarithmic measure that not requires the knowledge of a ground-truth image is introduced. This new measure is based on the use of a particular type of the high-order Rényi entropies. This method is based on measuring the anisotropy of the image through the variance of the expected value of the pixel-wise directional image entropy. Thus, a new logarithmic quality measure (LQM) is applied to a set of test images and compared with PSNR and other recently proposed quality metrics to reveal advantages and differences with them.

This work describes an image acquisition and processing system based on a new co-processor architecture designed for CMOS sensor imaging. The platform permits to configure a wide variety of acquisition modes (random region acquisition, variable image size, multi-exposition image) as well as high-performance image pre-processing (filtering, de-noising, binarisation, pattern recognition). Furthermore, the acquisition is driven by an FPGA, as well as a processing stage followed by a Nexperia processor. The data transfer, from the FPGAs board to the Nexperia processor, can be pipelined to the co-processor to increase achievable throughput performances. The co-processor architecture has been designed so as to obtain a unit that can be configured on the fly, in terms of type and number of chained processing (up to 8 successive pre-defined pre-processing), during the image acquisition process that is dynamically defined by the application. Examples of acquisition and processing performances are reported and compared to classical image acquisition systems based on standard modular PC platforms. The experimental results show a considerable increase of the performances. For instance the reading of bar codes with applications to postal sorting on a PC platform is limited to about 15 images (letters) per second. The new platform beside resulting more compact and easily installable in hostile environments can successfully analyze up to 50 images/s.

During the last few years, innovative optical design strategies to generate and control image mapping have been successful in producing high-resolution digital imagers and projectors. This new generation of panoramic lenses includes catadioptric panoramic lenses, panoramic annular lenses, visible/IR fisheye lenses, anamorphic wide-angle attachments, and visible/IR panomorph lenses. Given that a wide-angle lens images a large field of view on a limited number of pixels, a systematic pixel-to-angle mapping will help the efficient use of each pixel in the field of view. In this paper, we present several modern applications of these modern types of hemispheric lenses. Recently, surveillance and security applications have been proposed and published in Security and Defence symposium. However, modern hemispheric lens can be used in many other fields. A panoramic imaging sensor contributes most to the perception of the world. Panoramic lenses are now ready to be deployed in many optical solutions. Covered applications include, but are not limited to medical imaging (endoscope, rigiscope, fiberscope...), remote sensing (pipe inspection, crime scene investigation, archeology...), multimedia (hemispheric projector, panoramic image...). Modern panoramic technologies allow simple and efficient digital image processing and the use of standard image analysis features (motion estimation, segmentation, object tracking, pattern recognition) in the complete 360° hemispheric area.

CSEM presents a highly integrated ultra-miniature camera module with omni-directional view dedicated to autonomous micro flying devices. Very tight design and integration requirements (related to size, weight, and power consumption) for the optical, microelectronic and electronic components are fulfilled. The presented ultra-miniature camera platform is based on two major components: a catadioptric lens system and a dedicated image sensor. The optical system consists of a hyperbolic mirror and an imaging lens. The vertical field of view is +10° to -35°.The CMOS image sensor provides a polar pixel field with 128 (horizontal) by 64 (vertical) pixels. Since the number of pixels for each circle is constant, the unwrapped panoramic image achieves a constant resolution in polar direction for all image regions. The whole camera module, delivering 40 frames per second, contains optical image preprocessing for effortless re-mapping of the acquired image into undistorted cylindrical coordinates. The total weight of the complete camera is less than 5 g. The system's outer dimensions are 14.4 mm in height, with a 11.4 mm x 11.4 mm foot print. Thanks to the innovative PROGLOG^TM, a dynamic range of over 140 dB is achieved.

An in depth view is given of time-of-flight distance sensor and read-out circuit implementations. The sensor is a current assisted photonic demodulator, using majority currents to accelerate generated minority carriers towards the detecting junctions, and combines an efficient mixer with a sensitive detector. Single ended and differential configurations of the structure are illustrated. Measurements show a quantum efficiency of 58%, a DC demodulation contrast of nearly 100% and a contrast of over 40% maintained up till 60 MHz. An improved embodiment, having an extra drain tap to tune sensitivity, is also presented. With this structure automatic gain control and improved dynamic range can be achieved. Measurements demonstrate a controllable sensitivity from maximal to below 1% by changing a sensor control voltage. Secondly design aspects of the read-out circuit are discussed. A circuit with improved background light suppression and dynamic range is explained, called variable transimpedance amplifier. Special low pass filters for in-pixel averaging are presented, having a tuneable cut-off frequency of 10 Hz to 10 kHz and using only 100 μm². Circuit simulations show a dynamic range of 87 dB, as well as a background light tolerance up to 10 μA. Combining the circuit with a drain tap sensor yields a dynamic range of 127 dB. A standard CMOS 0.35 μm proof of principle prototype pixel, measuring 50 μm x 50 μm and having a 60% fill factor, is presented. Properties, as well as an example image, of a 32x32 CAPD imager are included.

This paper provides an overview of the medical scales which are currently in practice at the geriatrics department of the hospital for assessing independence and mobility of elderly patients. Several shortcomings and issues related to the scales are identified. It is shown how a 3D camera system could be used for the automatic assessment of several items of the scales. this automated assessment is overcoming many of the issues with the existing methods. An analysis of the automatically identified activity features of a typical patient is used to compare the data derived from our system with data obtained with accelerometer readings.

The main issue this paper addresses is to obtain the information sources characterising the video sequences represented in DWT domain and to discuss their relevance for practical applications. From the statistical point of view, this means to establish whether the DWT coefficients can be approximated by random variables and, if so, to compute the corresponding probability density functions (pdf). The corpus considered in experiments is composed of 10 video sequences, belonging to different movies, each of them about 25 minutes long, DivX coded at a very low rate.

This paper proposes the use of a modified Morlet wavelet in order to demodulate fringe patterns in conjunction with the one-dimensional continuous wavelet transform (1D-CWT). Our investigations demonstrate that the modified Morlet wavelet produces better results compared to the conventional Morlet wavelet when used in fringe pattern analysis. This novel technique offers superior performance in analysing fringe patterns from objects that exhibit large height variations. This new technique has been used in conjunction with the direct maximum ridge extraction algorithm and an improvement in performance is observed. The algorithm has been tested using both computer-generated and real fringe patterns; and was found to be suitable for fringe pattern demodulation and robust in operation.

We investigate the relation between discrete wavelet shrinkage and integrodifferential equations in the context of simplification and denoising of one-dimensional signals. In the continuous setting, strong connections between these two approaches were discovered in 6 (see references). The key observation is that the wavelet transform can be understood as derivative operator after the convolution with a smoothing kernel. In this paper, we extend these ideas to the practically relevant discrete setting with both orthogonal and biorthogonal wavelets. In the discrete case, the behaviour of the smoothing kernels for different scales requires additional investigation. The results of discrete multiscale wavelet shrinkage and related discrete versions of integrodifferential equations are compared with respect to their denoising quality by numerical experiments.

In this work a new multiresolution method to detect and classify edges appearing in images has been proposed. The edge detection and classification schema is based on the analysis of the data obtained by a multiresolution image analysis using Mallat and Zhong's wavelet. Multiresolution analysis allows to detect edges of different relevance at different scales, as well as to obtain other important aspects of the detected edge. The Discrete Wavelet Transform proposed by Mallat and Zhong has been used for detection and classification purposes. The classification schema developed is based on a simple polynomial-fitting algorithm. Analyzing properties of the fitted polynomial we are able to classify several edge types. The robustness of the proposed method has been tested with different geometrical contour types appeared in the literature. A real edge type has also been introduced: the 'noise', that allow us to implement a novel noise-filtering algorithm simply by eliminating the points belonging to this class. The proposed classification schema could be generalized to real edge types: shadows, corners, etc.

Nowadays, robust watermarking clearly identified its functionality within the multimedia production chain, from the content creation to the end-user consumption: property right identification and copy-maker tracking. In the quest for the speed required by today's real-time applications, compressed-domain watermarking becomes a hot research topic. This study evaluates the watermarking capacity in the MPEG-4 AVC domain in order to establish whether and to what extent compressed domain watermarking is viable. In this respect, the additive watermarking techniques are modelled by discrete noisy channels with non-causal side information at the transmitter. The study considers several attacks (linear and non-linear filtering, geometric) and computes the capacity of the corresponding channels. The experimental results are obtained out of processing a natural video corpus of 10 video sequences belonging to different movies, each of them about 25 minutes long (35000 frames in each video sequence).

Watermarking using pixel-wise masking in the wavelet domain proves to be quite robust against common signal processing attacks. Initially, in a system proposed by Barni et al., embedding is made only in the highest resolution level; there are two disadvantages to this technique: the watermark information can be easily erased by a potential attacker and embedding in the DWT is susceptible to geometric attacks, such as shifting. To enhance this watermarking method, we use a modified perceptual mask that models the human visual system behavior in a better way, previously proposed by the authors. The texture content is appreciated with the local standard deviation of the original image, which is further compressed in the wavelet domain. Since the approximation image of the coarsest level contains too little information, we appreciate the luminance content using a higher resolution level approximation sub-image. To increase the capacity of the watermarking scheme the embedding is made in the HWT domain, using two strategies: in the real parts of the HWT coefficients and in the absolute value of the HWT coefficients of the original image. The implementation of the HWT is made using a new technique, recently proposed by the authors. Moreover, we make use of all the levels except the coarsest one, for attack resilience. We use three types of detectors that take advantage of the hierarchical decomposition. Tests were made for different attacks (JPEG compression, median filtering, resizing, cropping, gamma correction, blurring, shifting and addition of white Gaussian noise), that prove the effectiveness of perceptual watermarking in the HWT domain.

This paper proposes a novel perceptual watermarking scheme operating in a Hermite transform domain. To achieve an acceptable level of watermark invisibility, masking properties of the Human Vision system (HVS) are exploited in the extraction of relevant local image features (texture, smooth regions, edges) for watermark embedding purpose. Many other works suggest the use of wavelets or contourlets. In our case, image features are extracted efficiently from the Hermite transform image representation which agrees with the Gaussian derivative model of the human visual perception. The resulting weighing mask is used to adapt the watermark strength to image regions during the embedding process. In order to ensure watermark resistance to global affine geometric attacks (rotation, scaling, translation and shearing) the design of the watermarking scheme is modified, mainly, by incorporating a normalization procedure. Image normalization, a means to achieve invariance to geometric transformations, is well known in computer vision and pattern recognition areas. In this new design, both watermark embedding and detection are carried out in the Hermite transform domain of moment-based normalized images. A sequence of tests is conducted on various images. Many removal attacks (JPEG compression, additive noise and filtering) as well as geometric attacks are applied from the Checkmark benchmark. Experimental results show the effectiveness of the whole scheme in achieving its goals in terms of watermark invisibility and robustness.

The rapid development of IT and WWW technique, causing person frequently confronts with various kinds of authorized identification problem, especially the copyright problem of digital products. The digital watermarking technique was emerged as one kind of solutions. The balance between robustness and imperceptibility is always the object sought by related researchers. In order to settle the problem of robustness and imperceptibility, a novel adaptive multi-resolution combined digital image watermarking algorithm was proposed in this paper. In the proposed algorithm, we first decompose the watermark into several sub-bands, and according to its significance to embed the sub-band to different DWT coefficient of the carrier image. While embedding, the HVS was considered. So under the precondition of keeping the quality of image, the larger capacity of watermark can be embedding. The experimental results have shown that the proposed algorithm has better performance in the aspects of robustness and security. And with the same visual quality, the technique has larger capacity. So the unification of robustness and imperceptibility was achieved.

A multispectral system based on a monochrome camera and an adaptive illumination source is presented in this paper. Its preliminary application is focused on material discrimination for food and beverage industries, where monochrome, color and infrared imaging have been successfully applied for this task. This work proposes a different approach, in which the relevant wavelengths for the required discrimination task are selected in advance using a Sequential Forward Floating Selection (SFFS) Algorithm. A light source, based on Light Emitting Diodes (LEDs) at these wavelengths is then used to sequentially illuminate the material under analysis, and the resulting images are captured by a CCD camera with spectral response in the entire range of the selected wavelengths. Finally, the several multispectral planes obtained are processed using a Spectral Angle Mapping (SAM) algorithm, whose output is the desired material classification. Among other advantages, this approach of controlled and specific illumination produces multispectral imaging with a simple monochrome camera, and cold illumination restricted to specific relevant wavelengths, which is desirable for the food and beverage industry. The proposed system has been tested with success for the automatic detection of foreign object in the tobacco processing industry.

Extended dynamic range (EDR) imaging is a post-processing technique commonly associated with photography. A set of images of the same scene which are recorded by the camera using different shutter settings are integrated into a single higher dynamic range image. Image processing software is used to identify pixels in the image which are correctly exposed, underexposed or overexposed and pixels with the optimum intensity are rescaled with respect to their exposure time and fused to form the EDR image. An intensity rescaling processing is then required as the EDR images generated generally exceed the contrast ratio of conventional displays and printers. In optical metrology, speckle interferometry and holography techniques require a well-modulated intensity signal to extract the phase information and of these techniques, shearography is most sensitive to different object surface reflectivities as it uses self-referencing from a sheared image. In this paper the authors demonstrate real-time EDR imaging in shearography extending an 8-bit camera to 16-bits. Experimental results from a difficult surface reflectivity sample, a wooden panel painting containing gold and dark earth colour paint, are presented. A pre-processing step that could be incorporated in the image capture routine was identified and implemented. This allowed the existing library of 8-bit image processing routines to be used without modification.

For space remote sensors with high resolution, large caliber, and long focal length, in-orbit automatic focusing technique is a significant application technology. Minimum image entropy (MIE) technology applied to real-time autofocusing system of space optical remote sensor possesses creativity and engineering significance. MIE's theoretical analysis, algorithm's computer simulation, and "Experimental Optical System" experiment have successfully validated MIE's validity as the criterion for optical remote sensor's auto-focusing. Related data indicate that for a diffraction-limited optical system with the f-ratio of F^#=39, the detecting sensitivity for checking-focus can be better than 0.1 mm, by means of MIE.

We present a simple computational model that works in the RGB colour space to detect moving shadow pixels in video sequences of indoor scenes, illuminated in each case by an incandescent source. A channel ratio test for shadows cast on some common indoor surfaces is proposed that can be appended to the developed scheme so as to reduce the otherwise high false detection rate. The core method, based on a Lambertian hypothesis, has been adapted to work well for near-matte surfaces by suppressing highlights. The results reported, based on an extensive data analysis conducted on some of the crucial parameters involved in the model, not only bring out the subtle details of the parameters, but also remove the ad hoc nature of the chosen thresholds to a certain extent. The method has been tested on various indoor video sequences; the results obtained indicate that it can be satisfactorily used to mark or eliminate the strong portion of the foreground shadow region.

A new integrated lensless bio-photonic sensors is being developed. It replaces the ordinary slide supporting the DNA spots, and the complex, large and expensive hybridisation and the scanner reading system, by a sandwich of well defined chemical and optical layers grafted onto a CCD sensor. The upper layer of the new biochip performs the biological function. Due to the architecture of the biochip leading to a lensless imaging of the spots directly on the sensor pixels, the images produced will have novel characteristics beyond the analysis capacity of reading software packages of microarray analysis. In this framework, specific image processing and statistical data analysis algorithms have been developed in order to assess and to quantify these images.

This work presents the results of shlieren visualization of thermo-elastic stress, which is induced by laser irradiation in the bulk of tissue or tissue-like gel. This thermo-elastic stress results from water absorption of the pulses of an Er-fiber laser radiation, which produced thermal effect in irradiated zone of tissue. Imaging of laser-irradiated zone of tissue with shadowgraph and digital image processing showed that thermal stress-zone is located in the tissues at the depth of absorption of laser radiation. Digital streak camera allowed us to observe frame-by-frame growth of thermal stress in irradiated tissue. Imaging of tissue with shadowgraph presented data on stress-waves, bubbles formation during a laser pulse repetition and generation of hydrodynamic flow after a laser pulse.

Interventional radiology is a new medical field which allows percutaneous punctures on patients for tumoral destruction or tissue analysis. The patient lies on a CT or MRI table and the practitioner guides the needle insertion iteratively using repetitive acquisitions (2D slices). We aim at designing a guidance system to reduce the number of CT/MRI acquisitions, and therefore decrease the irradiation and shorten the duration of intervention. We propose a system composed of two calibrated cameras and a structured light videoprojector. The cameras track at 15Hz the needle manipulated by the practitioner and a software displays the needle position with respect to a preoperative segmented image of the patient. To register the preoperative image in the camera frame, we firstly reconstruct the patient skin in 3D using the structured light. Then, the surfacic registration between the reconstructed skin and the segmented skin from the preoperative image is performed using the Iterative Closest Point (ICP) algorithm. Ensuring the quality of this registration is the most challenging task of the system. Indeed, a surfacic registration cannot correctly converge if the surfaces to be registered are too smooth. The main contribution of our work is the evaluation on patients of the conditions that can ensure a correct registration of the preoperative skin surface with the reconstructed one. Furthermore, in case of unfavourable conditions, we propose a method to create enough singularities on the patient abdomen so that the convergence is guaranteed. In the coming months, we plan to evaluate the full system during standard needle insertion on patients.

In this work we analyze the diffraction pattern generated by a four quadrant polarization mask. Different quadrants transmit different linear polarizations. We show that the diffraction pattern, in the absence of analyzer, shows the intensity distribution characteristic from a square aperture, but the state of polarization is not uniform. In particular, we demonstrate that an array of singular points (polarization vortices) is being generated. When an analyzer is placed behind the polarization diffractive mask, the intensity of the diffracted field is changed as the analyzer rotates. Experimental verification is performed with a twisted nematic liquid crystal display.

Spatial light modulators (SLM) have found a wide range of applications in many fields of optical imaging and measurement systems. We implement different phase only filters in the pupil plane of an imaging system. The phase only filter is divided in five equally spaced annuli. Each annulus has a different phase transmission and inside each annulus the phase is constant. We analyse first the influence of linear decreasing or increasing phase, second we use one phase annulus with a phase shift of π in different positions over the pupil and finally an alternating phase between 0 and π over the pupil. Merit functions of the different filters are calculated. The radial and axial point spread function (PSF) or the 3D line spread function show that in some cases these phase only filters will shift the best image plane. The experimental results show the close correlation to the calculated shift of the best image plane. The strong side lobes that appear in the merit functions lead to the conclusion that the image quality will be influenced as well. This can be confirmed by the calculation and the measurement of the image intensity. So in order to get more information about the expected image it is necessary to study the 3D modulation transfer function (MTF). With the MTF one can see that the contrast decreases for the image obtained with each filter in comparison with the image obtained with the clear pupil. The conclusion of our work is, that it is necessary to study the influence of all merit functions in order to design an optimum filter for a given application.

An artificial compound-eye imaging system has been developed consisting of one planar array of microlenses positioned on a spacing structure and coupled to a commercial CMOS optoelectronic detector array of different pitch, providing different viewing directions for the individual optical channels. Each microlens corresponds to one channel, which can be related to one or more pixels due to the different fill factors of the microlens array and the image sensor. Also alignment problems resulting from the matching of the microlens focal spots and the pixels during the assembly and the possible residual rotation between the artificial compound-eye objective and the pixel matrix are considered. We have written a program to automatically select the illuminated pixels of the sensor which correspond to each channel in order to form the final image. This calibration method is based on intensity criterions besides the geometric disposition of the microlens array. An image capture program that uses only the channels selected by the calibration is also presented. This program additionally implements image post-processing methods adapted to the microoptical compound-eye sensor. They are applied to the captured images in real time and allow increasing the contrast of the captured images. One of the methods used is the Wiener filter that is computed by taking into account an approximation of the multichannel imaging process of microoptical compound-eye sensors. Experimental results are presented, which show a noticeable increase in the frequency response when the Wiener filter is used, partially compensating the characteristic low spatial resolution of the artificial compound eyes.

Restricted by the device fabrication technology, traditional scanning imaging system can not get high spatial resolution, and it's difficult to get a line array whose sensor number is over 6000. A kind of non-conventional fiber bundle is designed to couple information. Using existing small scale plane arrays to receive the signals of the fiber bundle's output can acquire ultra-high spatial resolution image. However, owing to the special structure of the bundle, the image processing is very complicated. Double module extremum filter algorithm is proposed in this paper. This algorithm can eliminate the blind pixels caused by broken fibers, locate the center of each fiber in the output terminal of fiber, recover the input images completely, and achieve the spatial transform.

Three-dimensional object recognition with scale and rotation changes is addressed. The recognition method is described in terms of correlations between spherical surfaces. Tridimensionality is codified into range images. We used the phase Fourier transform of a range image which gives information about the orientation of the 3D object surfaces. A 3D object orientation map containing information about all possible rotations of the object is obtained. This map distribution is calculated using the amplitude of the phase Fourier transform for different views of the object. From that 3D object description it is possible to achieve detection and rotation estimation by performing a correlation between unit spheres even when only partial information is presented. In addition, a scale change of a rotated 3D object implies a change of the intensity in the unit sphere. We define correlations between the reference unit sphere and a certain target-patch placed on the surface of the unit sphere. Various experiments are carried out to confirm the correct detection. We also validate the method when other false targets were used. In addition to tolerance to scale and rotation, high discrimination against false targets is also achieved.

An overview is given of the output of two main pixels based on a Current Assistant Photonic Demodulator (CAPD) and their usability in a ranging camera based on the Time-Of-Flight (TOF) principle. The first structure is based on an active pixel with an integrating capacitor, while the second structure is based on a transimpedance amplifier. A measurement system capable of interfacing with a one-dimensional array of CAPD pixels has been designed and is briefly discussed. The linearity of both CAPD pixels is measured, compared to each other and discussed. Several sources of non-idealities present in the CAPD output have been investigated, including differences between rise and fall time and duty cycle imperfections of the high frequency binary correlating signal, as well as CAPD bandwidth. The possible influences of such non-idealities of the correlating wave on the measurements as well as on the calculated distance are discussed. Resulting non-idealities in the raw CAPD output values include clipping and non-linearity, yielding offsets and non-linearities in the calculated phase difference between the original and the reflected signal. Theoretic values are shown and compared against measurements. Finally, inter-pixel properties of a one-dimensional array of CAPD structures are presented, as well as a sample range image acquired by scanning.

Optical Character Recognition (OCR) techniques are widely used in data/text entry, process automation. Decades of research efforts have made the accurate recognition of typewritten text largely accepted as a solved problem. Driven by practical usage demands, the low complexity and high performance implementation techniques of OCR systems are studied. Recent research shows that it may not be possible even for a simple OCR to run on a portable device without a specialized digital signal processor. In this paper, we present a highly data-parallelized implementation of OCR for typewritten text onto the linear processor array of the Xetal chip. Besides the preprocessing stage, the most computation intensive part of OCR recognizing individual characters is highly parallelized onto the Single Instruction Multiple Data (SIMD) engine of the Xetal chip, which can process a VGA-resolution text frame within one tenth of a second. In addition, different parallelization schemes are explored to make trade-off between the degree of parallelism and the costs of preprocessing to reorganize data to feed the SIMD engine and post-processing to assemble and collect results. The exploration of parallelized OCR application brings additional performance gain when mapped onto the linear processor array of the Xetal chip.

In the note, several wavelet-based image processing algorithms are presented. Denoising algorithm is derived from the Donoho's thresholding. Rescaling algorithm reuses sub-division scheme of the Sweldens' lifting and a sensor linearization procedure exploiting system identification algorithms developed for nonlinear dynamic systems. Proposed autofocus algorithm is a passive one, works in wavelet domain and relies on properties of lens transfer function. The common advantage of the algorithms is that they can easily be implemented within the JPEG2000 image compression standard encoder, offering simplification of the final circuitry (or the software package) and the reduction of the power consumption (program size, respectively) when compared to solutions based on separate components.

With the enlargement of mankind's activity range, the significance for person's status identity is becoming more and more important. So many different techniques for person's status identity were proposed for this practical usage. Conventional person's status identity methods like password and identification card are not always reliable. A wide variety of biometrics has been developed for this challenge. Among those biologic characteristics, iris pattern gains increasing attention for its stability, reliability, uniqueness, noninvasiveness and difficult to counterfeit. The distinct merits of the iris lead to its high reliability for personal identification. So the iris identification technique had become hot research point in the past several years. This paper presents an efficient algorithm for iris recognition using gray-level co-occurrence matrix(GLCM) and Discrete Cosine transform(DCT). To obtain more representative iris features, features from space and DCT transformation domain are extracted. Both GLCM and DCT are applied on the iris image to form the feature sequence in this paper. The combination of GLCM and DCT makes the iris feature more distinct. Upon GLCM and DCT the eigenvector of iris extracted, which reflects features of spatial transformation and frequency transformation. Experimental results show that the algorithm is effective and feasible with iris recognition.

Considering the problem of automatic traffic sign detection and recognition in stereo images captured under motion conditions, a new algorithm for traffic sign detection and recognition based on features and probabilistic neural networks (PNN) is proposed in this paper. Firstly, global statistical color features of left image are computed based on statistics theory. Then for red, yellow and blue traffic signs, left image is segmented to three binary images by self-adaptive color segmentation method. Secondly, gray-value projection and shape analysis are used to confirm traffic sign regions in left image. Then stereo image matching is used to locate the homonymy traffic signs in right image. Thirdly, self-adaptive image segmentation is used to extract binary inner core shapes of detected traffic signs. One-dimensional feature vectors of inner core shapes are computed by central projection transformation. Fourthly, these vectors are input to the trained probabilistic neural networks for traffic sign recognition. Lastly, recognition results in left image are compared with recognition results in right image. If results in stereo images are identical, these results are confirmed as final recognition results. The new algorithm is applied to 220 real images of natural scenes taken by the vehicle-borne mobile photogrammetry system in Nanjing at different time. Experimental results show a detection and recognition rate of over 92%. So the algorithm is not only simple, but also reliable and high-speed on real traffic sign detection and recognition. Furthermore, it can obtain geometrical information of traffic signs at the same time of recognizing their types.

Image moments analysis is a very useful tool which allows image description invariant to translation and rotation, scale change and some types of image distortions. The aim of this work was development of simple method for fast and reliable classification of characters by using Hu's and affine moment invariants. Measure of Eucleidean distance was used as a discrimination feature with statistical parameters estimated. The method was tested in classification of Times New Roman font letters as well as sets of the handwritten characters. It is shown that using all Hu's and three affine invariants as discrimination set improves recognition rate by 30%.

The 3-D fluorescence microscope is a powerful method for imaging and studying living cells. However, the data acquired with conventional 3-D fluorescence microscope are not quantitatively significant for spatial distribution or volume evaluation of fluorescent areas in reason of distortions induced on data by the acquisition process. Theses distortions must be corrected for reliable measurements. The knowledge of the impulse response characterizing the instrument permits to consider the backward process retrieving the original data. One realize a deconvolution opposed to the convolution process induced by the microscope, projecting the 'object' space in the 'image' space. However, when the response of the system is not invariant in the observation field, the classical algorithms using Fourier Transform for computations are not usable. The contribution of this work is to present several approaches making it possible to use the Fourier Transform in non-invariance conditions and to simulate it's application in the 3-D fluorescence microscope problems.

It is well known that, different types of Jacobi radial functions can be obtained from generic formulas changing two real parameters α and β. In this paper a comparative gray level image reconstruction analysis for the cases α = β = 2; α = 3, β=2; α=β = 3; and α = β = 4 is done. As a reconstruction measurement is implemented the normalized image reconstruction error (NIRE). The test images analyzed in this work are acquired from flowers.

Nowadays, high-speed imaging offers high investigation possibilities for a wide variety of applications such as motion study, manufacturing developments. Moreover, due to the electronic progresses, real-time processing can be implemented in the high-speed acquisition systems. Important information can be extracted in real-time from the image and then be used for on-line controls. Therefore we have developed a high-speed smart camera with high-speed CMOS sensor, typically 500 fps with a 1.3 Mega-pixels resolution. Different specific processing have been implemented inside an embedded FPGA according to the high-speed data-flow. The processing are mainly dedicated to feature extraction such as edge detection, or image analysis, and finally markers extraction and profilometry. In any case, the data processing allows to reduce the large data flow (6.55 Gbps) and to propose a transfer on a simple serial output link as USB 2.0. This paper presents the high-speed smart camera and focuses two processing implementations: the marker extraction and the related profilometry measurement. In the marker extraction mode, the center of mass is determined for each marker by a combination of image filtering. Only the position of the center is transferred via the USB 2.0 link. For profilometry measurements, a simplify algorithm has been implemented at low-cost in term of hardware resources. The positions of the markers or the different object's profiles can be determined in real-time at 500 fps with full resolution image. A higher image rate can be reached with a lower resolution (i.e. 500 000 profiles for a single row image).

To improve the recording density of Polytopic multiplexed recording, we studied the spatial filtering effect from the view points of the filter size and signal-to-noise-ratio (SNR) of the reproduced signal. The relationship between SNR and spatial filter size is evaluated by using three dimensional model and Fresnel diffraction analysis. By applying the Wiener filter to the reproduced signal, we can improve SNR for small spatial filter size.

Wavefront coding (WFC) is a powerful hybrid optical-numerical technique for increasing the depth of focus of imaging systems. There is a low cost solution that uses decentred lenses inducing coma as an adjustable and removable phase element. This coding has been proven useful for IR systems. However these systems usually have several configurations with multiple fields of view. Unless the detector is uncooled, the f/number of the system is maintained for all configurations thus entrance pupil size changes for each one. As a result, the coding coma changes accordingly. This paper presents an approach to maintain the same amount of coma for dual field of view (DFOV) systems.

This paper deals with a 3D measurement system based on the "Shape from Polarization" method applied for transparent objects. The method is an application of polarization imaging techniques and its principle is as follows: after being reflected, an unpolarized light becomes partially linearly polarized. By analyzing its polarization parameters and by knowing the refractive index of the object to be controlled, the surface normals can be evaluated. Finally, the 3D shape is obtained by integrating the normals field. Section 1 introduces the opportunity to use polarisation imaging, section 2 recalls the measurement method and describes the angle measurement ambiguities naturally appearing and discusses how to overcome them, section 3 introduces the measurement setup and a part of its calibration and section 4 describes some examples on transparent objects.

Stitching technology is used to enlarge the tested area in interference and fringe projection system. By using this method we can test the profile of object which is larger than testing aperture. In the traditional digital holographic technique, only small objects can be recorded and reconstructed. In this study, a holographic phase stitching technique is proposed to solve this problem. Differ from the interference and fringe projection stitching, holographic phase stitching has its characteristic in the holographic diffraction process. In this paper, taking plane image measurement as an example, the theory of holographic phase stitching is presented. Stitching errors in the holographic phase stitching are deeply analyzed and relevant 2×2 stitching simulation is performed using a phase grating.