16 May 2008 Surface strain measurement of rotating objects using shearography instrumentation based on fibre-optic imaging bundles
Author Affiliations +
Proceedings Volume 7004, 19th International Conference on Optical Fibre Sensors; 70043U (2008) https://doi.org/10.1117/12.786785
Event: 19th International Conference on Optical Fibre Sensors, 2008, Perth, WA, Australia
Abstract
Quantitative, full-field surface strain measurement is achievable using shearography instrumentation that employs at least three measurement channels. The system presented here possesses four measurement channels consisting of four views of the object. Images from the four views are ported to the shearing interferometer using fibre-optic imaging bundles. The use of fibre-optic imaging bundles simplifies the experimental arrangement considerably, allowing full-field surface strain measurements to be made using just one CCD camera and one shearing interferometer. Simultaneous capture of data from the four measurement channels using a pulsed laser source allows the measurement of surface strain on dynamic objects. In this paper the use of the instrument to make measurements of the surface strain profile of a PTFE plate rotating at 600 rpm is described. The use of the spatial carrier technique allows the deformation induced phase variation to be calculated across the field of view from just two images recorded from the object on subsequent rotations.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. Francis, D. Francis, S. W James, S. W James, R. P. Tatam, R. P. Tatam, } "Surface strain measurement of rotating objects using shearography instrumentation based on fibre-optic imaging bundles", Proc. SPIE 7004, 19th International Conference on Optical Fibre Sensors, 70043U (16 May 2008); doi: 10.1117/12.786785; https://doi.org/10.1117/12.786785
PROCEEDINGS
4 PAGES


SHARE
Back to Top