11 July 2008 Mechanical design of the WIYN One Degree Imager (ODI)
Author Affiliations +
Abstract
The WIYN consortium is building the One Degree Imager (ODI) to be mounted to a Nasmyth port of the WIYN 3.5m telescope, located at Kitt Peak, Arizona (USA). ODI will utilize both the excellent image quality and the one-degree field of view that the telescope delivers. To accommodate the large field of view (~0.39m diameter unvignetted field with 0.54m across the diagonal of the one-degree-square, partially vignetted field), 0.6m-class optics are required. The ODI design consists of a two element corrector: one serves as a vacuum barrier to the cryostat, the other is an asphere; two independently rotating bonded prism pairs for atmospheric dispersion compensation (ADC); nine independently deployable filters via a simple pivoting motion; and a 971 mega-pixel focal plane consisting of 64 orthogonal transfer array (OTA) devices. This paper is an overview of the mechanical design of ODI and describes the optical element mounting and alignment strategy, the ADC & filter mechanisms, plus the focal plane. Additionally, the project status will be discussed. In accompanying papers Jacoby1 describes ODI's optical design, Yeatts2 describes the software and control system design, and Harbeck3 gives a general update on the project.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gary P. Muller, Daniel Harbeck, George H. Jacoby, Charles Harmer, Andrey Yeatts, Dan Blanco, John Cavin, Dave Sawyer, "Mechanical design of the WIYN One Degree Imager (ODI)", Proc. SPIE 7014, Ground-based and Airborne Instrumentation for Astronomy II, 70144R (11 July 2008); doi: 10.1117/12.789765; https://doi.org/10.1117/12.789765
PROCEEDINGS
13 PAGES


SHARE
RELATED CONTENT

The mechanical design of CHARIS an exoplanet IFS for...
Proceedings of SPIE (July 18 2014)
ASTROCAM an Offner re imaging 1024 x 1024 InSb...
Proceedings of SPIE (March 07 2003)
EMIR mechanical design status
Proceedings of SPIE (September 30 2004)
Omega Cass a new multimode NIR imager spectrometer for...
Proceedings of SPIE (August 21 1998)

Back to Top