16 July 2008 Thermal performance prediction of the TMT optics
Author Affiliations +
Thermal analysis for the Thirty Meter Telescope (TMT) optics (the primary mirror segment, the secondary mirror, and the tertiary mirror) was performed using finite element analysis in ANSYS and I-DEAS. In the thermal analysis, each of the optical assemblies (mirror, mirror supports, cell) was modeled for various thermal conditions including air convections, conductions, heat flux loadings, and radiations. The thermal time constant of each mirror was estimated and the temperature distributions of the mirror assemblies were calculated under the various thermal loading conditions. The thermo-elastic analysis was made to obtain the thermal deformation based on the resulting temperature distributions. The optical performance of the TMT optics was evaluated from the thermally induced mirror deformations. The goal of this thermal analysis is to establish thermal models by the FEA programs to simulate for an adequate thermal environment. These thermal models can be utilized for estimating the thermal responses of the TMT optics. In order to demonstrate the thermal responses, various sample time-dependent thermal loadings were modeled to synthesize the operational environment. Thermal responses of the optics were discussed and the optical consequences were evaluated.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Myung Cho, Myung Cho, Andrew Corredor, Andrew Corredor, Shane Pootrakul, Shane Pootrakul, Konstantinos Vogiatzis, Konstantinos Vogiatzis, George Angeli, George Angeli, "Thermal performance prediction of the TMT optics", Proc. SPIE 7017, Modeling, Systems Engineering, and Project Management for Astronomy III, 701716 (16 July 2008); doi: 10.1117/12.789212; https://doi.org/10.1117/12.789212


Thermal performance of the ATST secondary mirror
Proceedings of SPIE (November 20 2007)
Contact hole reflow by finite element method
Proceedings of SPIE (May 03 2005)
Thermal analysis and seeing improvement of LAMOST enclosure
Proceedings of SPIE (September 23 2007)
Thermal analysis of the TMT telescope structure
Proceedings of SPIE (August 04 2010)
Performance evaluations of the ATST secondary mirror
Proceedings of SPIE (September 16 2007)
Thermal modeling of the TMT Telescope
Proceedings of SPIE (November 10 2011)

Back to Top