Translator Disclaimer
Paper
15 July 2008 FPGA based control system for space instrumentation
Author Affiliations +
Abstract
The prototype for a general purpose FPGA based control system for space instrumentation is presented, with particular attention to the instrument control application software. The system HW is based on the LEON3FT processor, which gives the flexibility to configure the chip with only the necessary HW functionalities, from simple logic up to small dedicated processors. The instrument control SW is developed in ANSI C and for time critical (<10μs) commanding sequences implements an internal instructions sequencer, triggered via an interrupt service routine based on a HW high priority interrupt.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anna M. Di Giorgio, Pasquale Cerulli Irelli, Francesco Nuzzolo, Renato Orfei, Luigi Spinoglio, Giovanni S. Liu, and Paolo Saraceno "FPGA based control system for space instrumentation", Proc. SPIE 7019, Advanced Software and Control for Astronomy II, 70191I (15 July 2008); https://doi.org/10.1117/12.789385
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
Back to Top