Paper
21 July 2008 Dual-side backward coupler waveguide orthomode transducer for the 3 mm band
Alessandro Navarrini, Renzo Nesti
Author Affiliations +
Abstract
We describe the design, construction, and characterization results of a waveguide Orthomode Transducer (OMT) for the 3 mm band (84-116 GHz.) The OMT is based on a symmetric backward coupling structure and has a square waveguide input port (2.54 mm × 2.54 mm) and two single-mode waveguide outputs: a standard WR10 rectangular waveguide (2.54 mm × 1.27 mm,) and an oval waveguide with full-radius corners. The reverse coupling structure is located in the common square waveguide arm and splits one polarization signal in two opposite rectangular waveguide sidearms using broadband -3 dB E-plane branch-line hybrid couplers. The device was optimized using a commercial 3D electromagnetic simulator. The OMT consists of two mechanical blocks fabricated in split-block configuration using conventional CNC milling machine. From 84 to 116 GHz the measured input reflection coefficient was less than -17 dB, the isolation between the outputs was less than -50 dB, the cross polarization was less than -30 dB, and the transmission was larger than -0.35 dB at room temperature for both polarization channels. The device is suitable for scaling to higher frequency.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alessandro Navarrini and Renzo Nesti "Dual-side backward coupler waveguide orthomode transducer for the 3 mm band", Proc. SPIE 7020, Millimeter and Submillimeter Detectors and Instrumentation for Astronomy IV, 70202M (21 July 2008); https://doi.org/10.1117/12.791198
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Polarization

Transformers

Calibration

Transducers

Wave propagation

Gold

Back to Top