Paper
22 July 2008 A DSP-based infrared and optical bidimensional detectors controller
Arturo Iriarte, Luis A. Martínez, Fernando Ángeles, Abel Bernal, Gerardo Lara
Author Affiliations +
Abstract
The Institute of Astronomy at the Universidad Nacional Autonoma de México have developed and tested a CCD controller based on Texas Instruments Digital Signal Processor (DSP) TMS30C31@50MHz. Images are temporally stored in a 2MB static RAM attached to the DSP and transferred to the host computer running under Linux. Both tasks, acquisition and timing, are programmable so it can be conditioned to control any bidimensional detector. Analog voltage for bias, offsets and gains are fully programmable also. The system has been tested on an infrared Hawaii detector and fast Marconi 80x80 pixels CCD.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Arturo Iriarte, Luis A. Martínez, Fernando Ángeles, Abel Bernal, and Gerardo Lara "A DSP-based infrared and optical bidimensional detectors controller", Proc. SPIE 7021, High Energy, Optical, and Infrared Detectors for Astronomy III, 70210F (22 July 2008); https://doi.org/10.1117/12.790409
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital signal processing

Sensors

Charge-coupled devices

Infrared radiation

Infrared detectors

Infrared sensors

Data acquisition

RELATED CONTENT

A Novel Double Imaging Camera (ANDICAM)
Proceedings of SPIE (March 07 2003)
Thermal IRCCDS For Space Applications
Proceedings of SPIE (December 07 1988)
Staring Infrared Focal Planes For Smart Sensors
Proceedings of SPIE (August 20 1979)

Back to Top