Translator Disclaimer
10 September 2008 Sensitivity enhancement of guided wave surface plasmon resonance sensors using top nano dielectric layer
Author Affiliations +
Abstract
Surface plasmon resonance (SPR) and guided wave SPR (GWSPR) are widely used in sensing. Efforts to improve the sensitivity and stability of these sensors are done by using different multilayer nanostructures such as with the long range SPR and the use of combinations of materials such as gold and silver. Silver based SPR sensors have high sensitivity but a poor stability because of the interactions with water and air. We have shown both theoretically and experimentally that by using the silver based SPR sensor with a 10-15 nm top layer of dielectric film with a high value of the real part ε' of the dielectric function, it is possible to improve the sensitivity of the sensor by few times. The imaginary part ε'' of the top nano layer's permittivity needs to be small enough in order to reduce the losses and get sharper dips. The stability of the sensor is also improved because the nano layer is protecting the silver from interacting with the environment. The calculated evanescent field is enhanced near the top layer - analyte interface, thus the enhancement is due to this and due to an increase of the interaction length as a waveguiding effect.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Amit Lahav, Mark Auslender, and I. Abdulhalim II "Sensitivity enhancement of guided wave surface plasmon resonance sensors using top nano dielectric layer", Proc. SPIE 7041, Nanostructured Thin Films, 70410A (10 September 2008); https://doi.org/10.1117/12.794167
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Surface plasmon photodetectors
Proceedings of SPIE (May 06 2013)

Back to Top