2 September 2008 External efficiency and thermal reliability enhanced multi-chip package design for light emitting diodes
Author Affiliations +
Abstract
With the power of light emitting diodes (LEDs) getting higher and higher, the issue of thermal management is getting much more important. In this paper, we discussed a new idea to get white light without using traditional phosphor and to enhance its extraction efficiency. Microlens is used for increasing external efficiency and shaping light pattern. The location of micro-lens is designed carefully by considering cup reflection. We also revealed that it is important to consider the angle of exit light from LEDs. The result shows our design is suitable for high color rendering index (CRI) application. At the same time, the uniform white light is approached as the light has been strongly diffused. Furthermore, we try to decrease the junction temperature as low as possible so as to increase stability and lifetime of LEDs. In order to maintain color mixing and dissipate heat, multi-chip or four pairs of electrodes which are electroplated with copper after bulk micromachining process within a silicon-based package are used. This novel packaging technique needs just a few processing steps and could be mass produced for nowadays high brightness light emitting diodes (HBLEDs).
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Meng-Han Tang, Tsung-Han Wu, and Guo-Dung J. Su "External efficiency and thermal reliability enhanced multi-chip package design for light emitting diodes", Proc. SPIE 7058, Eighth International Conference on Solid State Lighting, 70580Q (2 September 2008); doi: 10.1117/12.800069; https://doi.org/10.1117/12.800069
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Large area LED package
Proceedings of SPIE (March 08 2015)
LED packaging using high sag rectangular microlens array
Proceedings of SPIE (April 20 2006)
Wafer capping of MEMS with fab-friendly metals
Proceedings of SPIE (January 18 2007)
A new golden bump making method for high power LED...
Proceedings of SPIE (November 19 2007)

Back to Top