Paper
2 September 2008 LED array: Where does far-field begin?
Author Affiliations +
Abstract
Any cluster of light-emitting diodes (LEDs) can be modeled as a directional point source if the far-zone condition is met. A general condition is derived for the distance beyond which the far-zone approximation can be used in measuring or modeling propagation of light from an LED array. A simple equation gives the far-field condition in function of parameters of influence, such as LED radiation pattern, array geometry, and number of LEDs. We calculate the nearzone extension of clusters with LED radiation patterns of practical interest; for example Lambertian-type, batwing, and side emitting. The far-field condition is shown to be considerable shorter for high packaging density LED arrays. Moreover, the far-field dramatically changes in function of the beam divergence of the LED radiation pattern. For example, the near-zone of a square LED array with highly directional LEDs (small half-intensity viewing angle) can extend to more than 70 times the cluster size. This value is far from the classical rule of thumb (5 times the source size).
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ivan Moreno and Ching-Cherng Sun "LED array: Where does far-field begin?", Proc. SPIE 7058, Eighth International Conference on Solid State Lighting, 70580R (2 September 2008); https://doi.org/10.1117/12.795944
Lens.org Logo
CITATIONS
Cited by 32 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Sensors

Packaging

Light sources

Nickel

Solids

Near field

RELATED CONTENT

Far-field condition for OLED light sources
Proceedings of SPIE (September 18 2013)
Design of a lighting system with high power LEDs, large...
Proceedings of SPIE (February 16 2017)
Configurations of LED arrays for uniform illumination
Proceedings of SPIE (October 21 2004)
LED packaging using high sag rectangular microlens array
Proceedings of SPIE (April 21 2006)

Back to Top