29 August 2008 The design, construction and characterization of a solid elastic lens
Author Affiliations +
Abstract
Recent times have seen the production of normal and micro liquid lenses with variable focal length. These have been specially made with transparent elastic materials and liquid medium between them, or with a dielectric liquid medium inside the cavity. Change in the volume of the liquid medium, in the first case, or the application of an electric field as in the second, produced a change in the optical parameters of the lens. The present study offers the opto-mechanical design, manufacture and characterization of a solid elastic lens made of Polydimethylsiloxane (PDMS). To do so, we have prepared a mechanical support frame to hold all of the components of the lens and also allow for the application of radial stress on its periphery. In order to ensure a well-finished lens surface a high quality optical glass mold has also been constructed. Finally, we will present an analysis of the properties of this type of lens when it undergoes variations of radial stress. The experimental results are presented.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Santiago-Alvarado, A. Santiago-Alvarado, S. Vázquez-Montiel, S. Vázquez-Montiel, F. Iturbide-Jiménez, F. Iturbide-Jiménez, R. Arriaga-Martínez, R. Arriaga-Martínez, J. González-García, J. González-García, "The design, construction and characterization of a solid elastic lens", Proc. SPIE 7060, Current Developments in Lens Design and Optical Engineering IX, 706017 (29 August 2008); doi: 10.1117/12.795699; https://doi.org/10.1117/12.795699
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

A comparison of equivalent moldable glasses
Proceedings of SPIE (September 06 2013)
Seal designing of theodolite used in seaside environment
Proceedings of SPIE (August 20 2014)
DefGO
Proceedings of SPIE (August 06 2018)
Theoretical analysis for double-liquid variable focus lens
Proceedings of SPIE (September 16 2007)
Aspheric design for manufacturability
Proceedings of SPIE (May 13 2007)
Prototyping of miniature plastic imaging lens
Proceedings of SPIE (January 21 2004)

Back to Top