Paper
9 September 2008 Optical properties of Dy3+ doped epoxy novolak resin
Vaclav Prajzler, Vitezslav Jerabek, Ivan Huttel, Oleksei Lyutakov, Jarmila Spirkova, Vladimir Machovic, Jiri Oswald, Jiri Zavadil
Author Affiliations +
Abstract
We report about properties of epoxy novolak resin polymer doped with dysprosium ions. The polymer layers were fabricated by spin-coating onto silicon substrates, or pouring epoxy novolak resin solution into bottomless molds placed on a quartz substrate and leaving them to dry. Rather strong bands around 3366 cm-1 in the infrared spectra indicated presence of the O-H groups. Absorption measurements were done in the spectral range from 300 nm to 3000 nm and showed six strong bands at 758 nm (6F3/2), 807 nm (6F5/2), 906 nm (6F7/2), 1100 nm (6F9/2), 1280 nm (6F11/2) and 1685 nm (6H11/2) corresponding to Dy3+ ions. Optical band gap Eg was determined from the absorption coefficient values using Tauc's procedure, i.e., from the relationship αhv = A(hv - Eg)2 and the obtained values varied from 3.489 eV to 3.539 eV depending on the amount of dysprosium ions involved in the samples. Photoluminescence spectra around 1300 nm were investigated by using excitation of He-Ne laser (632.8 nm) and two semiconductor lasers (980 nm and 827 nm).
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vaclav Prajzler, Vitezslav Jerabek, Ivan Huttel, Oleksei Lyutakov, Jarmila Spirkova, Vladimir Machovic, Jiri Oswald, and Jiri Zavadil "Optical properties of Dy3+ doped epoxy novolak resin", Proc. SPIE 7061, Novel Optical Systems Design and Optimization XI, 706119 (9 September 2008); https://doi.org/10.1117/12.793788
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Dysprosium

Ions

Polymers

Absorption

Epoxies

Luminescence

Doping

Back to Top