Translator Disclaimer
3 September 2008 Calibration of MCP transmissivity from 2-5.5keV
Author Affiliations +
A micro-channel plate (MCP) transmissivity is calibrated using the 3B3 medium energy X-ray beamline (from 2.0 to 5.5keV) on Beijing Synchrotron Radiation Facility (BSRF). MCP transmissivity near the two ends of low-energy 2.0keV and high-energy 5.5keV is higher than the middle part. We calculate reflectivity and transmission in the pores array of MCP respectively, and take the experiment result into account synthetically. It uncovers that the grazing incident X-ray in pores results in the total reflection, and the reflectivity rises as the X-ray energy decreases, which successfully explains the peculiar phenomena of the high transmissivity in low energy.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhu-rong Cao, Hang Li, Jian-jun Dong, Shun-chao Wu, and Rong-qing Yi "Calibration of MCP transmissivity from 2-5.5keV", Proc. SPIE 7077, Advances in X-Ray/EUV Optics and Components III, 70771M (3 September 2008);


LIGA for lobster?
Proceedings of SPIE (January 05 2001)
LIGA fabrication of high-aspect-ratio lobster-eye optics
Proceedings of SPIE (November 21 2001)
Soft X-Ray Calibration of Diffracting Materials
Proceedings of SPIE (August 12 1986)
Design and simulation of nested x-ray mirrors
Proceedings of SPIE (December 07 2006)

Back to Top