26 August 2008 An antireflective coating suitable for use on polymer optics
Author Affiliations +
Although metal halide anti-reflective (AR) coatings are widely used by manufacturers of electronics equipment, high application temperatures mean that they can only easily be applied to glass substrates. Screens made from plastics materials can be coated but the process requires additional steps to prevent damaging the substrate. A new, easily applied anti-reflective coating has been designed which can be applied to both plastic and glass substrates. The single layer coating applied to an acrylic substrate has proven to be better performing than current commercial single layer anti-reflective coatings. This performance has been achieved from an amorphous fluoropolymer solution which is dip coated onto the substrate.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lynley J. Crawford, Lynley J. Crawford, Neil R. Edmonds, Neil R. Edmonds, Peter N. Plimmer, Peter N. Plimmer, Jonathan Lowy, Jonathan Lowy, } "An antireflective coating suitable for use on polymer optics", Proc. SPIE 7095, Nanophotonics and Macrophotonics for Space Environments II, 709505 (26 August 2008); doi: 10.1117/12.797522; https://doi.org/10.1117/12.797522


Ta2O5 Al2O3 SiO2 antireflective coating for...
Proceedings of SPIE (February 19 2017)
Antireflection Coatings Utilizing Multiple Half Waves
Proceedings of SPIE (November 27 1983)
Procedures to reduce reflection on polymer surfaces
Proceedings of SPIE (August 23 2005)
Developing polymeric antireflective coatings
Proceedings of SPIE (September 08 2008)
Graded reflector/absorber coating
Proceedings of SPIE (November 01 1993)

Back to Top