Paper
26 August 2008 The impact of radiation hardened by design (RHBD) techniques on the performance of readout integrated circuits in radiation environments
John E. Hubbs, Mark E. Gramer, Diana Maestas-Jepson, Gary A. Dole, Allan Hahn
Author Affiliations +
Abstract
The tolerance of a hybrid array (HA) to total ionizing dose (TID) radiation continues to be a major performance consideration for space based imaging systems. In an effort to improve TID performance, HA manufacturers have begun to utilize circuit design techniques to enhance the TID tolerance of readout integrated circuits (ROICs). This paper will report on the radiometric and TID radiation characterizations of a HA that utilizes radiation-hardened-by-design (RHBD) techniques. This paper will not describe the design techniques used. Instead, characterization data are presented that demonstrate a HA TID tolerance of over 25 units of total ionizing dose (UTID). This result is compared with the performance of devices with ROICs processed at commercial foundries that do not make use of RHBD techniques. The HA described in this paper represents a state-of-the-art device; the ROIC was designed to be low noise, high gain, and radiation tolerant. While design techniques were utilized to enhance its TID hardness, no special fabrication processes were used.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John E. Hubbs, Mark E. Gramer, Diana Maestas-Jepson, Gary A. Dole, and Allan Hahn "The impact of radiation hardened by design (RHBD) techniques on the performance of readout integrated circuits in radiation environments", Proc. SPIE 7095, Nanophotonics and Macrophotonics for Space Environments II, 70950E (26 August 2008); https://doi.org/10.1117/12.796871
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Readout integrated circuits

Digital electronics

Amplifiers

Sensors

Analog electronics

Fabrication

Tolerancing

RELATED CONTENT

Analysis and design of low noise column stage in CMOS...
Proceedings of SPIE (March 04 2015)
Design of a ROIC with 15um pitch for MWIR FPAs
Proceedings of SPIE (October 15 2015)
Digital scanner infrared focal plane technology
Proceedings of SPIE (September 16 2011)
A new design of ROIC with CDS and programmable arbitrary...
Proceedings of SPIE (September 08 2011)

Back to Top