10 October 2008 Study for external calibration method for cloud profiling radar on EarthCARE
Author Affiliations +
Abstract
EarthCARE mission has objectives to reveal aerosol and cloud interaction and to reveal relationships with radiation budget. For this purpose, the EarthCARE satellite has four instruments, which are Atmospheric LIDAR (ATLID), Multi Spectral Imager (MSI) and Broad Band Radiometer (BBR) in addition to Cloud Profiling Radar (CPR). CPR is developed under cooperation of Japanese Aerospace Exploration Agency (JAXA) and National Institute of Information and Communications Technology (NICT) in Japan. The requirement of sensitivity is -35dBZ, therefore CPR uses W-band frequency and needs a large (2.5m) antenna reflector. The large antenna has small footprint and is to give up antenna scanning. From this, some difficulty of external calibration using active radar calibrator (ARC) is recognized. One solution of external calibration is using scattering from natural distributed target, such as sea surface. Then the measurement of sea surface scattering using airborne cloud radar was performed. The sea surface scattering property is being prepared. Second solution is that ARC puts on exact location of sub-satellite track. Precise sub-satellite track prediction is necessary. We focus second solution in this paper. The test experiment was demonstrated using CloudSat of NASA/JPL, which is provided CPR using W-band frequency. The feasibility of this calibration method is discussed.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroaki Horie, Hiroaki Horie, Toshiyoshi Kimura, Toshiyoshi Kimura, Kazuyuki Okada, Kazuyuki Okada, Yuichi Ohno, Yuichi Ohno, Kenji Sato, Kenji Sato, Hiroshi Kumagai, Hiroshi Kumagai, } "Study for external calibration method for cloud profiling radar on EarthCARE", Proc. SPIE 7106, Sensors, Systems, and Next-Generation Satellites XII, 71060T (10 October 2008); doi: 10.1117/12.802335; https://doi.org/10.1117/12.802335
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

EarthCARE/CPR design results and PFM performance
Proceedings of SPIE (October 15 2013)
Cloud profiling radar design study for EarthCARE
Proceedings of SPIE (October 20 2005)
EarthCARE/CPR design and verification status
Proceedings of SPIE (November 18 2012)
Development status of cloud profiling radar for EarthCARE
Proceedings of SPIE (September 28 2009)
Cloud profiling radar for EarthCARE mission
Proceedings of SPIE (April 29 2003)

Back to Top