9 October 2008 Updated status and capabilities for the LOTIS 6.5 meter collimator
Author Affiliations +
Abstract
The Large Optical Test and Integration Site (LOTIS) at Lockheed Martin Space Systems Company (LMSSC) in Sunnyvale, California was designed and constructed in order to allow advanced optical testing for systems up to a maximum aperture of up to 6.5 meters in air or vacuum over a bandwidth of 0.4 to over 5 μm with a design field of view of 1.5 milliradians. Previously reported information for the LOTIS 6.5 meter diameter Collimator was based on data collected during initial testing of this device at the University of Arizona's Steward Observatory Mirror Laboratory. This paper will report progress and new results for the LOTIS Collimator as it is re-assembled and tested during its final integration into its facility at LMSSC. In addition, we will discuss Scene Projection Technology (SPT) capabilities that can be added to provide user test capabilities meeting or exceeding many of the original specifications of the Collimator, primarily in increased optical bandwidth and field-of-view. Finally, we will describe additional optical tools (e.g., interferometers and smaller collimators) that are integral to the LOTIS facility that can provide flexible optical testing options for a wide array of users.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sheldon B. Hutchison, Sheldon B. Hutchison, Andrew Cochrane, Andrew Cochrane, Shanna McCord, Shanna McCord, Raymond Bell, Raymond Bell, } "Updated status and capabilities for the LOTIS 6.5 meter collimator", Proc. SPIE 7106, Sensors, Systems, and Next-Generation Satellites XII, 710618 (9 October 2008); doi: 10.1117/12.808187; https://doi.org/10.1117/12.808187
PROCEEDINGS
12 PAGES


SHARE
Back to Top