17 October 2008 Study of EUVL mask defect repair using FIB-GAE method
Author Affiliations +
Abstract
We evaluated a new FIB-GAE (Focused Ion Beam-Gas Assisted Etching) repairing process for the absorber defects on EUVL mask. XeF2 gas and H2O gas were used as etching assist agent and etching stop agent respectively. The H2O gas was used to oxidize Ta-nitride side-wall and to inactivate the remaining XeF2 gas after the completion of defect repair. At the Photomask Japan 2008 we had reported that side-etching of Ta-nitride caused CD degradation in EUVL. In the present paper we report on the performance of defect repair by FIB, and of printability using SFET (Small Field Exposure Tool). The samples evaluated, were in form of bridge defects in hp225nm L/S pattern. The cross sectional SEM images certified that the newly developed H2O gas process prevented side-etching damage to TaBN layer and made the side-wall close to vertical. The printability also showed excellent results. There were no significant CD changes in the defocus characterization of the defect repaired region. In its defect repair process, the FIB method showed no signs of scan damage on Cr buffered EUV mask. The repair accuracy and the application to narrow pitched pattern are also discussed.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tsuyoshi Amano, Tsuyoshi Amano, Yasushi Nishiyama, Yasushi Nishiyama, Hiroyuki Shigemura, Hiroyuki Shigemura, Tsuneo Terasawa, Tsuneo Terasawa, Osamu Suga, Osamu Suga, Kensuke Shiina, Kensuke Shiina, Fumio Aramaki, Fumio Aramaki, Ryoji Hagiwara, Ryoji Hagiwara, Anto Yasaka, Anto Yasaka, } "Study of EUVL mask defect repair using FIB-GAE method", Proc. SPIE 7122, Photomask Technology 2008, 71222H (17 October 2008); doi: 10.1117/12.801214; https://doi.org/10.1117/12.801214
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Vote taking for EUV lithography a radical approach to...
Proceedings of SPIE (March 24 2017)
Image placement error due to pattern transfer for EUV masks
Proceedings of SPIE (December 27 2002)
Cr absorber mask for extreme-ultraviolet lithography
Proceedings of SPIE (January 22 2001)
Impact of an etched EUV mask black border on imaging...
Proceedings of SPIE (November 08 2012)
Evaluation of defect repair of EUV mask absorber layer
Proceedings of SPIE (June 28 2005)
Black border with etched multilayer on EUV mask
Proceedings of SPIE (June 29 2012)

Back to Top