13 October 2008 Theoretical considerations and measurements for phoropters
Author Affiliations +
Abstract
A phoropter is one of the most popular ophthalmic instruments used in current optometry practice. The quality and verification of the instrument are of the utmost importance. In 1997, International Organization for Standardization published the first ISO standard for requirements of phoropters. However, in China, few standard and test method are suggested for phoropters. Research work on test method for phoropters was carried out early in 2004 by China National Institute of Metrology. In this paper, first, structure of phoropters is described. Then, theoretical considerations for its optical design are analyzed. Next, a newly developed instrument is introduced and measurements are taken. By calibration, the indication error of the instrument is not over 0.05m-1. Finally, measurement results show that the quality situation of phoropters is not as good as expected because of production and assembly error. Optical design shall be improved especially for combinations of both spherical and cylindrical lenses with higher power. Besides, optical requirements specified in ISO standard are found to be a little strict and hard to meet. A proposal for revision of this international standard is drafted and discussed on ISO meeting of 2007 held in Tokyo.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiyan Zhang, Wenli Liu, Jie Sun, "Theoretical considerations and measurements for phoropters", Proc. SPIE 7129, Seventh International Symposium on Instrumentation and Control Technology: Optoelectronic Technology and Instruments, Control Theory and Automation, and Space Exploration, 712903 (13 October 2008); doi: 10.1117/12.807368; https://doi.org/10.1117/12.807368
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

A new method to treat a spherical lens as a...
Proceedings of SPIE (November 03 2003)
The lithographic lens: its history and evolution
Proceedings of SPIE (March 15 2006)
Metrology of inkjet MEMS devices
Proceedings of SPIE (June 02 2003)
Performance evaluation facility for ladars
Proceedings of SPIE (September 13 2004)
Improving metrology for micro-optics manufacturing
Proceedings of SPIE (November 10 2003)

Back to Top