Paper
10 October 2008 Transient response characteristics of position sensitive detector irradiated by moving light source
Author Affiliations +
Abstract
A distributed RC transmission-line approximation is used to analyze the transient response characteristic of one-dimensional (1D) position sensitive detectors (PSDs). A generalized mathematical model has been developed for a moving light source illuminated on the PSD. The relative error curve has been given between the computed and true incident positions of light under different moving speeds, and the impact of different starting positions has been analyzed on the position detection error of light. It is shown that when the moving speed is less than the tenth characteristic speed, the output photocurrents can be rather linearly detected as long as the measuring time is longer than the delayed time maximum. It is also found that the distance between the original point and starting position should be as short as possible in order to obtain the correct incident position of light. The computed photocurrents have been compared with data simulated using the ANSYS software, and qualitative agreement is found.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongyan Shang "Transient response characteristics of position sensitive detector irradiated by moving light source", Proc. SPIE 7129, Seventh International Symposium on Instrumentation and Control Technology: Optoelectronic Technology and Instruments, Control Theory and Automation, and Space Exploration, 712904 (10 October 2008); https://doi.org/10.1117/12.807371
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light sources

Sensors

Time metrology

Light

Computer simulations

Electrodes

Technetium

RELATED CONTENT

Emitter location errors in electronic recognition system
Proceedings of SPIE (April 20 2017)
A new multi-probe scanning method for measuring optical surface
Proceedings of SPIE (September 27 2016)
Influence of edge error on MTF
Proceedings of SPIE (February 10 2005)
Multicolor LED sensor
Proceedings of SPIE (April 28 2008)

Back to Top