31 December 2008 Geometric error measurement of spiral bevel gears and data processing
Author Affiliations +
Proceedings Volume 7130, Fourth International Symposium on Precision Mechanical Measurements; 71300F (2008) https://doi.org/10.1117/12.819551
Event: Fourth International Symposium on Precision Mechanical Measurements, 2008, Anhui, China
Abstract
This paper calculates the theoretical tooth surface of spiral bevel gear and, using coordinate measuring machine, inspects the actual tooth surface, which provides an objective and quantitative method for inspecting the tooth surface of spiral bevel gears. For many reasons there are some deviations between the actual tooth surface and the theoretical tooth surface. Based on the differential geometry and space engagement theory, this paper deduces the analytical representation of theoretical tooth surface through the process of gear generation. After comparing the coordinates of the actual gear tooth surface and the theoretical tooth surface, a high-precision analysis graphics of tooth surface errors can be obtained by measuring date processing. A pair of aviation spiral bevel gears manufactured by Phoenix 800PG Grinding machine are inspected by Mahr measurement. The result of comparison of gear surface errors, inspected respectively by the method of this paper and by the Mahr's software, shows the consistency of the error distribution. The experiment verifies the validity and feasibility of the method presented in this paper.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xue-mei Cao, Qing-mei Cao, Hao Xu, "Geometric error measurement of spiral bevel gears and data processing", Proc. SPIE 7130, Fourth International Symposium on Precision Mechanical Measurements, 71300F (31 December 2008); doi: 10.1117/12.819551; https://doi.org/10.1117/12.819551
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Measurement of micro gears with a touch-trigger probe
Proceedings of SPIE (January 31 2013)
A new image quality assessment database for tiled images
Proceedings of SPIE (February 03 2014)
A dedicated on-line detecting system for auto air dryers
Proceedings of SPIE (October 10 2013)
Optoelectronic computer-aided measuring OPTEL system
Proceedings of SPIE (July 29 2002)
Fuzzy-logic-based approach to color quality processing
Proceedings of SPIE (June 14 1996)

Back to Top