31 December 2008 Measuring path planning and surface fitting technology for non-axisymmetric aspheric lens
Author Affiliations +
Proceedings Volume 7130, Fourth International Symposium on Precision Mechanical Measurements; 71300I (2008) https://doi.org/10.1117/12.819554
Event: Fourth International Symposium on Precision Mechanical Measurements, 2008, Anhui, China
Abstract
Path planning and surface fitting are the key technologies in the non-axisymmetric aspheric measuring. In accordance with the requirements of high-precision compensation machining for parallel grinding of non-axisymmetric aspheric lens, in this paper, measuring paths are planned based on the machining error. The measuring system is designed and carried out. The nonlinear least square fitting method is adopted in surface fitting for the non-axisymmetric aspheric lens and the surface quality of optical lens is effectively estimated by the fitting error. The experiment result indicates that the fitting residual error is in the 10-3mm magnitude order, which can meet the request of compensation machining. By comparing with the theory equation, the original data for compensation machining can be obtained, and the accuracy of compensation machining is well controlled.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiang Guo, Jiang Guo, Yinbiao Guo, Yinbiao Guo, Jian Wang, Jian Wang, Tianzheng Zhang, Tianzheng Zhang, } "Measuring path planning and surface fitting technology for non-axisymmetric aspheric lens", Proc. SPIE 7130, Fourth International Symposium on Precision Mechanical Measurements, 71300I (31 December 2008); doi: 10.1117/12.819554; https://doi.org/10.1117/12.819554
PROCEEDINGS
7 PAGES


SHARE
Back to Top