31 December 2008 Development of a touch trigger probe for micro/nano CMM
Author Affiliations +
Proceedings Volume 7130, Fourth International Symposium on Precision Mechanical Measurements; 71300K (2008) https://doi.org/10.1117/12.819556
Event: Fourth International Symposium on Precision Mechanical Measurements, 2008, Anhui, China
Abstract
Conventional Coordinate Measuring Machines (CMMs) restrict the possibilities for measuring micro mechanical products and noncontact optical measuring methods are not suitable for true three-dimensional measurements. The integrated combination of optical sensors and mechanical transducers employed in this research makes an ideal low cost and high precision touch trigger probe possible to measure miniature components. This touch probe is composed of a stylus with a fiber sphere (310μm in diameter) and a sensor integrated floating plate. The ball tip is fabricated using optical fiber with melting and solidification processes. The stylus is attached to a floating plate, which is connected to the probe housing via four micro wires. The shape and dimension of the floating plate, as well as the length and diameter of the micro wire, are determined according to the selected contact forces. When the probe tip is displaced the wires will perform elastic deformation and four mirrors mounted onto the four-legged plate will amplify the up/down displacement at each mirror position. These displacements can be detected by four corresponding laser focus probes. Experiments were carried out to test the unidirectional touch trigger repeatability. The standard deviation is less than 10nm. The probe structure and the experimental results were also analyzed and validated with finite element AnSYS software.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei-Li Wang, Wei-Li Wang, Kuang-Chao Fan, Kuang-Chao Fan, Ye-Jin Chen, Ye-Jin Chen, Ye-Tai Fei, Ye-Tai Fei, } "Development of a touch trigger probe for micro/nano CMM", Proc. SPIE 7130, Fourth International Symposium on Precision Mechanical Measurements, 71300K (31 December 2008); doi: 10.1117/12.819556; https://doi.org/10.1117/12.819556
PROCEEDINGS
6 PAGES


SHARE
Back to Top