31 December 2008 Analyzing dynamic characteristics of NC table with SVD
Author Affiliations +
Proceedings Volume 7130, Fourth International Symposium on Precision Mechanical Measurements; 713057 (2008); doi: 10.1117/12.819747
Event: Fourth International Symposium on Precision Mechanical Measurements, 2008, Anhui, China
Abstract
This article employs SVD (singular value decomposition) method to study dynamic characteristics of NC (numerical control) table. Acceleration signals of the NC table at three directions were tested; the singular spectrum of the signals was acquired with SVD; principal components of the signals were found out; the dynamic characteristics of the signals and its contributing factors were studied through extracting dynamic characteristics of principal components; and quantitative analysis was made on signals and principal components through calculating signal energy. The results indicated that signal characteristics of the previous two principal components are apparent, based on which dynamic characteristics of chaotic signal can be extracted; signal at perpendicular direction of table is greatly correlated with that at the horizontal moving direction, indicating that they are excited from the same vibration source. But signals perpendicular to each other in terms of moving direction at the horizontal level is rarely correlated; total signal energy is maximum at moving direction, minimum at horizontal non-moving direction and in the middle at perpendicular non-moving direction; bending vibration of lead screw at perpendicular direction is far more violent than that at horizontal direction.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Linhong Wang, Bo Wu, "Analyzing dynamic characteristics of NC table with SVD", Proc. SPIE 7130, Fourth International Symposium on Precision Mechanical Measurements, 713057 (31 December 2008); doi: 10.1117/12.819747; https://doi.org/10.1117/12.819747
PROCEEDINGS
7 PAGES


SHARE
KEYWORDS
Quantitative analysis

Servomechanisms

Complex systems

Interference (communication)

Lead

Control systems

Mathematical modeling

Back to Top