PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
This paper presents the design of an intelligent receiver system based on DSP and Avalanche photodiode. A new method
of changing the reverse bias voltage based on the real-time measured noise of the system is proposed to avoid the
environment influence on the performance of APD and to obtain the optimal operating performance of the whole system.
Both the reverse-biased voltage and the automatic gain control loop are adjusted together by DSP, and so the high SNR
is achieved and reception light saturation is eliminated. Method of compensating the walk error based on the reflected
signal amplitude is used to improve the precision of phase shift measurement. The laser range finder fitted with the
newly designed system can get a dynamic range 1:1500 and a phase-shift measurement resolution better than 0.045°.
The measured diatance resolution is 0.125mm when the modulation frequency is 150MHz.
Fang-xiu Jia,Zhen-Liang Ding, andFeng Yuan
"Design of intelligent receiver system for phase-shift laser range finder", Proc. SPIE 7133, Fifth International Symposium on Instrumentation Science and Technology, 71332U (12 January 2009); https://doi.org/10.1117/12.810485
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Fang-xiu Jia, Zhen-Liang Ding, Feng Yuan, "Design of intelligent receiver system for phase-shift laser range finder," Proc. SPIE 7133, Fifth International Symposium on Instrumentation Science and Technology, 71332U (12 January 2009); https://doi.org/10.1117/12.810485