Paper
18 November 2008 Design and fabrication of 2×2 InP/InGaAsP optical switch
Qiongfang Ma, Yongqing Huang, Hui Huang, Changyi Yang, Xiaomin Ren
Author Affiliations +
Proceedings Volume 7135, Optoelectronic Materials and Devices III; 713523 (2008) https://doi.org/10.1117/12.803252
Event: Asia-Pacific Optical Communications, 2008, Hangzhou, China
Abstract
An InGaAsP/InP 2×2 Mach-Zehnder interferometer (MZI) optical switch based on multimode interference (MMI) couplers was presented. The switch characteristics were simulated using a three-dimensional beam propagation model. The switch structure was designed to be single mode operation and insensitive to polarization. The light signal can be switched from cross port to bar port with an injection current of 43mA by carrier modulation on the principle of injection free carriers, bend-filling effects and bandgap shrinkage. The measured crosstalk is -19.2dB and -14.3dB at the on and off state, respectively. This optical switch can be easily integrated with other active devices and has potential application in future DWDM and OXC systems.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiongfang Ma, Yongqing Huang, Hui Huang, Changyi Yang, and Xiaomin Ren "Design and fabrication of 2×2 InP/InGaAsP optical switch", Proc. SPIE 7135, Optoelectronic Materials and Devices III, 713523 (18 November 2008); https://doi.org/10.1117/12.803252
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Optical switching

Brain-machine interfaces

Switches

Polarization

3D modeling

Wave propagation

Back to Top