4 December 2008 Process capability comparison between LELE DPT and spacer for NAND flash 32nm and below
Author Affiliations +
Proceedings Volume 7140, Lithography Asia 2008; 714035 (2008) https://doi.org/10.1117/12.808003
Event: SPIE Lithography Asia - Taiwan, 2008, Taipei, Taiwan
Abstract
This work demonstrates a methodology for evaluating the multiple feature error budget of NAND-Flash Gate layer and investigates the process capability of the Double Patterning Technology (DPT) options, LELE and Spacer, for NAND Flash 32nm and below. Since the effective k1 limit for DPT is near 0.14 for dense 1D features, three types of ASML scanners are potential candidates for imaging such devices: XT:1400, XT:1700i and XT:1900i. We will present the results of a simulation evaluation of the DPT process capability of these scanners for NAND-Flash Gate layer with 32nm and 22nm half pitch. The DPT capability involves not only lithography but also the subsequent patterning steps of the selected process flow. Moreover, the pattern sensitivity to scanner parameter variations increases with further scaling. It is therefore crucial to take into account the reasonable budgets of scanner dose, focus and overlay errors as well as the error budgets of film deposition, etch and mask registration. This work will not only evaluate the LELE DPT and Spacer feasibility for the mentioned scanners but also analyze the main contributors of CDU in DPT processes and indicate directions we may follow to improve.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shih-en Tseng, Alek C. Chen, "Process capability comparison between LELE DPT and spacer for NAND flash 32nm and below", Proc. SPIE 7140, Lithography Asia 2008, 714035 (4 December 2008); doi: 10.1117/12.808003; https://doi.org/10.1117/12.808003
PROCEEDINGS
11 PAGES


SHARE
Back to Top