You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
3 October 2008Error analysis and compensation of binocular-stereo-vision measurement system
Measurement errors in binocular stereo vision are analyzed. It is proved that multi-stage calibration can efficiently
reduce systematic errors due to depth of field. Furthermore, for difficulty in carry-out of multi-stage calibration, the
compensation methods of errors are presented in this paper. First, using standard plane template, system calibration is
completed. Then, moving the cameras to different depths, multiple views are taken and 3d coordinates of special points
on template are calculated. Finally, error compensation model in depth is established with least square fitting.
Experiment based on CMM indicates the relative error of measurement is reduced by 5.1% with the proposed method in
this paper. This is of practical value in expanding measurement range in depth and improving measurement accuracy.
Tao Zhang andJunjie Guo
"Error analysis and compensation of binocular-stereo-vision measurement system", Proc. SPIE 7155, Ninth International Symposium on Laser Metrology, 71552Q (3 October 2008); https://doi.org/10.1117/12.814600
The alert did not successfully save. Please try again later.
Tao Zhang, Junjie Guo, "Error analysis and compensation of binocular-stereo-vision measurement system," Proc. SPIE 7155, Ninth International Symposium on Laser Metrology, 71552Q (3 October 2008); https://doi.org/10.1117/12.814600