Translator Disclaimer
28 January 2009 Transceiving protocol design for a free space optical communication system
Author Affiliations +
Abstract
A new transceiving protocol is demonstrated for a Free Space Optical (FSO) communication system, and it's discussed in two parts: the transmitting protocol and the receiving protocol. During the discussion of these two parts, the cooperation of them is also discussed. Different from wired communication, an FSO system modulates the data on a narrow beam of laser transmitting through the free space or the atmosphere, and the protocol presented in this paper is mainly optimized for terrestrial Free Space Optical links, in which the signal channel of the system is mainly the atmosphere. Due to the complex composition and activity of the atmosphere, this signal channel brings in great influence on the transmitting laser in it, for example, the absorption and scattering of the atmosphere molecules and aerosols, the scintillation of received laser power caused by the turbulence of the atmosphere, all of which results in a much higher Bit Error Rate (BER) of the communication system. Thus in designing a protocol for an FSO system, more effort should be taken in the encoding of the data stream, the synchronization of the data stream, error checking and exception handling. The main function of the transmitting protocol includes interfacing the outer input data with a parallel port, buffering the input data, encoding the input data stream, serializing the parallel data and output the serialized data. It also has an output management unit to manage the activity of each part of the transmitting protocol. The main function of the receiving protocol includes filtering and synchronizing the input serial data stream, paralleling the serial data stream, decoding the input data, error checking, exception handling and interfacing the outer receiver with a parallel port. The entire transceiving protocol could be programmed into a single FPGA chip to improve system integrity and reduce the system cost. The presented protocol could be taken as "protocol transparent" for outer interfaces, meaning that when interfacing the presented system to an outer system, you don't have to consider what protocol the outer system transceiving data stream is under, for example, the TCP/IP protocol or anything else, in the case that its I/O interface is a parallel port. Simulation and final experiment prove that the protocol presented is working fine at a certain bit rate scale.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hualong Wang, Wanxin Su, and Zhongbao Xing "Transceiving protocol design for a free space optical communication system", Proc. SPIE 7156, 2008 International Conference on Optical Instruments and Technology: Optical Systems and Optoelectronic Instruments, 71562E (28 January 2009); https://doi.org/10.1117/12.807032
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Atmospheric effects on laser systems
Proceedings of SPIE (February 28 1991)
Study of channel character of solar blind UV communication
Proceedings of SPIE (February 21 2008)
Free-space optics second generation
Proceedings of SPIE (November 05 2008)
Availability of airborne hybrid FSO/RF links
Proceedings of SPIE (June 01 2005)

Back to Top