Translator Disclaimer
28 January 2009 Instrumentation design and precision analysis of the external diameter measurement system based on CCD parallel light projection method
Author Affiliations +
Abstract
The principle of the double parallel light path projection method is to image the workpiece' right and left edges onto two CCDs respectively, through two parallel light paths. Then the workpiece's external diameter can be obtained by calculating the length of the photosensitive units on the shadow field of the two CCDs, plus to the distance between two parallel light paths. In this way, double light path measurement system enlarges the measurement range while ensuring the measurement accuracy. To obtain exactly the result, the video signal output by CCD should be first filtered and amplified, then binary-value processed and at last pulse filled and counted. In the mechanical design of the system, screw pair drive is applied to achieve the up-and-down movement. Its precision mainly lies on the Abbe Error caused by the offset between the centerline and the mobile line of the capacitive-gate ruler, the heeling error of the guide mechanism, and the error caused by the dilatometric change of parts resulted from the temperature change. Rotary mechanism is achieved by stepper motor and gear drive. Its precision is determined by the stepping angle error of the stepper motor, the gear transmission error, and the heeling error of the piston relative to the rotation axis. The software mainly includes serial communication interface program, elevator motor control program, rotating motor control program, data processing program and error modification program.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qing Song, Di Wu, Jing Liu, Chunsong Zhang, and Jiayong Huang "Instrumentation design and precision analysis of the external diameter measurement system based on CCD parallel light projection method", Proc. SPIE 7156, 2008 International Conference on Optical Instruments and Technology: Optical Systems and Optoelectronic Instruments, 71562I (28 January 2009); https://doi.org/10.1117/12.807067
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Process synchronous CCD-video digitizer
Proceedings of SPIE (October 29 1993)
The CCD imaging systems for LAMOST
Proceedings of SPIE (June 29 2006)
Firefly system concept
Proceedings of SPIE (December 01 1991)
Rotation-canceling real time system of color video image
Proceedings of SPIE (January 29 2007)
Advances in CCD Technology
Proceedings of SPIE (December 11 1985)

Back to Top