Paper
2 February 2009 A detection and control method of resin liquid-level of stereolithography apparatus
Yiqing Wang, Wanhua Zhao, Leping Shi, Bingheng Lu
Author Affiliations +
Abstract
A set of laser detecting system for liquid-level with inclination measurement-based high-resolution and a sinking-block device are developed to detect and control the liquid-level of Stereolithography Apparatus precisely. A brightness-variable laser source is adopted to eliminate the computational error of divider, a closed-loop circuit is set to measure the terminal voltage directly which proportional to the output current of PSD, and hence the position of laser beam can be indicated accurately. A sinking-block device is employed to control the liquid level. The precise calibration result of this detecting device indicates that the resolution of the liquid-level detection can reach ±1.5µm. Compared with overflow liquid-level control, this liquid-level control device of sinking-block style can allow the liquid-level wave reduce from ±45µm to ±15µm. This system works stable with the high precision and antijamming ability. It has applied successfully in Stereolithography Apparatus.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yiqing Wang, Wanhua Zhao, Leping Shi, and Bingheng Lu "A detection and control method of resin liquid-level of stereolithography apparatus", Proc. SPIE 7160, 2008 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Applications, 716009 (2 February 2009); https://doi.org/10.1117/12.819841
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Liquids

Control systems

Stereolithography

Signal processing

Calibration

Laser sources

Lithium

RELATED CONTENT


Back to Top