Paper
19 February 2009 Comparison of silica-based materials and fibers in side- and end-pumped fiber lasers
Andreas Langner, Gerhard Schötz, Mario Such, Volker Reichel, Stephan Grimm, Martin Leich, Sonja Unger, Johannes Kirchhof, Björn Wedel, Volker Krause, Georg Rehmann
Author Affiliations +
Abstract
We have developed a production process for rare earth doped bulk silica to fulfill the demand of such material for fiber laser applications. In contrast to the standard techniques such as a combination of MCVD (modified chemical vapor deposition) and solution doping, our novel technology is based on a granulate process that enables novel ultra large mode area fiber designs (XLMA) with active core diameters above 100 μm as well as larger batch sizes. Several Yb-doped fibers with two different fiber designs were manufactured and successfully tested in both side- and end-pumped fiber laser setups. Both fiber designs have been compared to similar MCVD fibers. The influence of the material composition on the photodarkening properties has been investigated.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andreas Langner, Gerhard Schötz, Mario Such, Volker Reichel, Stephan Grimm, Martin Leich, Sonja Unger, Johannes Kirchhof, Björn Wedel, Volker Krause, and Georg Rehmann "Comparison of silica-based materials and fibers in side- and end-pumped fiber lasers", Proc. SPIE 7195, Fiber Lasers VI: Technology, Systems, and Applications, 71950Q (19 February 2009); https://doi.org/10.1117/12.808218
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Fiber lasers

Cladding

Silica

Doping

Semiconductor lasers

Signal attenuation

RELATED CONTENT


Back to Top