24 February 2009 Micro ID marking for semiconductor chips: recent progress and future prospects
Author Affiliations +
Abstract
When the frequency, pulse width, the beam profile, and energy density of the laser were controlled, then irradiated onto the silicon wafer with a beam of 15μm diameter or less, we observed that convex dot with a height of 100-300 nano- meters was formed. [1] The laser energy density through which the convex dot was formed was below 3.8J/cm2. In the semiconductor excitation laser, the pulse width was 40nsec-150nsec; the wavelength was 532 nm. [2]We developed equipment by using convex dots that was able to form 2D minute code of 16x16 dots in 100μm x100μm area in each IC chip on the silicon wafer without particle generation .
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yoshiaki Kokushi, Yoshiaki Kokushi, Yoshinori Saitou, Yoshinori Saitou, Akira Mori, Akira Mori, } "Micro ID marking for semiconductor chips: recent progress and future prospects", Proc. SPIE 7202, Laser-based Micro- and Nanopackaging and Assembly III, 72020N (24 February 2009); doi: 10.1117/12.808503; https://doi.org/10.1117/12.808503
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Nanogap experiments for laser cooling: a progress report
Proceedings of SPIE (March 07 2007)
High-power UV laser machining of silicon wafers
Proceedings of SPIE (November 18 2003)
High-intensity laser processing of thin films
Proceedings of SPIE (June 29 2001)
Micropeak array in the scribe line on a wafer
Proceedings of SPIE (November 06 2000)
Laser cleaning of silicon membrane stencil masks
Proceedings of SPIE (February 03 2000)

Back to Top