24 February 2009 Nanoskiving: a novel method for nanofabrication and its applications in nanophotonics
Author Affiliations +
Abstract
Nanoskiving is a novel and inexpensive method that has been used to fabricate both isolated nanostructures and ordered arrays of nanostructures. The dimensions of the nanostructures are determined by i) the thickness of the deposited thinfilm (tens of nanometers), ii) the topography (sub-μm, using soft lithography) of the surface onto which the thin-film is deposited, and iii) the thickness of the section cut by the microtome (> 30 nm by ultramicrotomy). Nanoskiving can fabricate complex nanostructures that are difficult or impossible to achieve by other methods of nanofabrication. These include multilayer structures, structures on curved surfaces, structures that span gaps, structures in less familiar materials, structures with high aspect ratios, and large-area structures comprising two-dimensional periodic arrays. In this paper, we described the history, procedure, and applications, particularly in nanophotonics, of nanoskiving.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiaobing Xu, Qiaobing Xu, George M. Whitesides, George M. Whitesides, } "Nanoskiving: a novel method for nanofabrication and its applications in nanophotonics", Proc. SPIE 7205, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics II, 72050P (24 February 2009); doi: 10.1117/12.810803; https://doi.org/10.1117/12.810803
PROCEEDINGS
9 PAGES


SHARE
Back to Top