6 February 2009 Liquid level sensor utilising a long period fiber grating
Author Affiliations +
Abstract
We propose here a liquid level sensor using a long period fiber grating (LPFG) in which direct liquid level measurement is carried out by utilising an LPFG, 100mm in length and a periodicity of 1mm. The LPFG was exposed to liquids with varying levels and the wavelength shift of a selected loss band of the transmission spectra was monitored using a broadband light source and an optical spectrum analyzer. The mechanism of this LPFG sensor is based on the fact that the effective Refractive Index (RI) of a cladding mode is directly dependant on the RI of the surrounding medium, be it air, or in this case water and petrol. As the surrounding RI changes, so does the phase matching condition of the LPFG. The result for the level change of the liquid with a specific RI is both a shift in wavelength and a change in the attenuation level of the selected loss band. For the selected loss band, continuous wavelength shifts of 9.5 nm and 25 nm for 100 mm of water and petrol level change have been observed respectively, with sub-millimetre accuracy.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Grice, S. Grice, W. Zhang, W. Zhang, K. Sugden, K. Sugden, I. Bennion, I. Bennion, } "Liquid level sensor utilising a long period fiber grating", Proc. SPIE 7212, Optical Components and Materials VI, 72120C (6 February 2009); doi: 10.1117/12.809104; https://doi.org/10.1117/12.809104
PROCEEDINGS
8 PAGES


SHARE
Back to Top