Analysis of lung nodule detectability and anatomical clutter in tomosynthesis imaging of the chest

Sungwon Yoon; Jianan G. Gang; Daniel J. Tward; Jeffrey H. Siewerdsen; Rebecca Fahrig

doi:10.1117/12.813836

12 March 2009 Analysis of lung nodule detectability and anatomical clutter in tomosynthesis imaging of the chest

Sungwon Yoon, Jianan G. Gang, Daniel J. Tward, Jeffrey H. Siewerdsen, Rebecca Fahrig

Author Affiliations +

Proceedings Volume 7258, Medical Imaging 2009: Physics of Medical Imaging; 72581M (2009) https://doi.org/10.1117/12.813836
Event: SPIE Medical Imaging, 2009, Lake Buena Vista (Orlando Area), Florida, United States

Abstract

Tomosynthesis is an imaging technique that has gained renewed interest with recent advancements of flat-panel digital detectors. Because of the wide range of potential applications, a systematic analysis of 3D tomosynthesis imaging systems would contribute to the understanding and development. This paper extends a systematic evaluation of thoracic tomosynthetic imaging performance as a function of imaging parameters, such as the number of projections, tomosynthesis orbital extent, and reconstruction filters. We evaluate lung nodule detectability and anatomical clutter as a function of tomosynthesis orbital extent using anthropomorphic phantoms and a table-top acquisition system. Tomosynthesis coronal slices were reconstructed using the FDK algorithm for cone-beam geometry from 91 projections uniformly distributed over acquisition orbital extents (θ) ranging from 10° to 180°. Visual comparisons of different tomosynthesis reconstructions of a lung nodule show the progressive decrease of anatomical clutter as θ increases. Additionally, three quantitative figures of merit were computed and compared: signal-difference-to-noise ratio (SDNR), anatomical clutter power spectrum (PS), and theoretical detectability index (DI). Lung nodule SDNR increases as θ increases from 0° to 120°. Anatomical clutter PS shows that the clutter magnitude and correlation decrease as θ increases, increasing detectability. Similarly, 2D and 3D DI increase as θ increases in the anatomical dominated exposure ranges. On the other hand, 2D slice DI is lower than the 3D DI for larger θ (e.g. 120°), because of the information loss in the depth direction for 2D slices. In other words, inspecting 3D is better for larger acquisition orbital extents, because the extra information acquired at larger angles cannot be fully recovered from 2D tomosynthesis reconstruction slices. In summary, detectability in tomosynthesis reconstructions for thoracic imaging increases as fixed dose is distributed over a larger acquisition orbital extent (up to 120°).

Citation Download Citation

Sungwon Yoon, Jianan G. Gang, Daniel J. Tward, Jeffrey H. Siewerdsen, and Rebecca Fahrig "Analysis of lung nodule detectability and anatomical clutter in tomosynthesis imaging of the chest", Proc. SPIE 7258, Medical Imaging 2009: Physics of Medical Imaging, 72581M (12 March 2009); https://doi.org/10.1117/12.813836

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE