17 March 2009 Modeling and experiments of non-telecentric thick mask effects for EUV lithography
Author Affiliations +
Various issues related to non-telecentric mask effects for EUV lithography will be discussed in this paper. First, a raytracing approach will provide a conceptual description as to the nature of non-telecentric thick mask effects, highlighting the behavior of various edge types and corners. Rigorous modeling of these effects are discussed along with a few consequences of improper modeling. A series of simulation and experimental studies are presented to probe both the one- and two-dimensional impact of thick mask effects. It will be shown that a simple constant edge bias appears sufficient for 1D features, but begins to break down when space-widths are less than about 45 nm. Investigation into the impact of corners and small 2D features indicates that a simple edge-based bias also breaks down for edge lengths less than about 60nm. A sample set of rules-based post-OPC HV corrections for 22nm node dimensions are proposed, although based on experimental results, it is concluded that more accurate resist modeling and scanner stability are required before being able to precisely predict and control HV effects. Finally, with some simplifying assumptions, simulation is used to predict the extent of potential HV effects of future EUV imaging systems.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gregory McIntyre, Gregory McIntyre, Chiew-seng Koay, Chiew-seng Koay, Martin Burkhardt, Martin Burkhardt, Hiro Mizuno, Hiro Mizuno, Obert R. Wood, Obert R. Wood, } "Modeling and experiments of non-telecentric thick mask effects for EUV lithography", Proc. SPIE 7271, Alternative Lithographic Technologies, 72711C (17 March 2009); doi: 10.1117/12.813536; https://doi.org/10.1117/12.813536


EUV lithography scanner for sub-8nm resolution
Proceedings of SPIE (March 15 2015)
NXE:3300B platform: imaging applications for Logic and DRAM
Proceedings of SPIE (September 30 2013)
EUV high NA scanner and mask optimization for sub 8nm...
Proceedings of SPIE (March 17 2016)
Mix-and-match considerations for EUV insertion in N7 HVM
Proceedings of SPIE (March 23 2017)
On the extensibility of extreme UV lithography
Proceedings of SPIE (April 07 2011)

Back to Top