Novel lithography approach using feed-forward mask-based wafer CDU correction increase fab productivity and yield

Shmoolik Mangan; Erik Byers; Dan Rost; Mike Garrett; Merri Carlson; Craig Hickman; Jo Finders; Paul Luehrmann; Robert Kazinczi; Ingrid Minnaert-Janssen; Frank Duray; Baukje Wisse; Nicole Schoumans; Liesbeth Reijnen; Thomas Theeuwes; Michael Ben-Yishai; Rachel Ren; Ryan Gibson; Lior Shoval; Yaron Cohen; Yair Elblinger; Ilan Englard

doi:10.1117/12.815415

23 March 2009 Novel lithography approach using feed-forward mask-based wafer CDU correction increase fab productivity and yield

Shmoolik Mangan, Erik Byers, Dan Rost, Mike Garrett, Merri Carlson, Craig Hickman, Jo Finders, Paul Luehrmann, Robert Kazinczi, Ingrid Minnaert-Janssen, Frank Duray, Baukje Wisse, Nicole Schoumans, Liesbeth Reijnen, Thomas Theeuwes, Michael Ben-Yishai, Rachel Ren, Ryan Gibson, Lior Shoval, Yaron Cohen, Yair Elblinger, Ilan Englard

Author Affiliations +

Proceedings Volume 7272, Metrology, Inspection, and Process Control for Microlithography XXIII; 72722B (2009) https://doi.org/10.1117/12.815415
Event: SPIE Advanced Lithography, 2009, San Jose, California, United States

Abstract

The extension of ArF lithography through reduced k1, immersion and double patterning techniques makes lithography a difficult challenge. Currently, the concept of simple linear flow from design to functional photo-mask is being replaced by a more complex scheme of feedback and feed-forward loops which have become part of a complex computational lithography scheme. One such novel lithography concept, called "holistic lithography", was recently introduced by ASML, as a scheme that makes the lithography process a highly efficient solution for the scaled down geometries. This approach encourages efficient utilization of computational lithography and the use of feed-forward and feed-back critical dimension (CD) and overlay correction loops. As sub-nanometer feature dimensions are reached for 3x nodes, with k1 reaching the optics limitations, Mask error enhancement factor (MEEF) values grow fast, thus making mask uniformity fingerprint and degradation throughout its life time a significant factor in printed CDU on the wafer. Whereas the consensus is on the need for growing density of intra-field data, traditional critical dimension scanning electron microscope (CDSEM) Feed backward loops to the litho-cell become unsuitable due to the high density CD measurement requirements. Earlier publications proposed implementing the core of the holistic lithography concept by combining two technologies: Applied Material's IntenCD^TM and ASML DoseMapper . IntenCD metrology data is streamed in a feedforward fashion through DoseMapper and into the scanner, to create a dose compensation recipe which improves the overall CDU performance. It has been demonstrated that the IntenCD maps can be used to efficiently reduce intra-field printed CDU on printed wafers. In this paper we study the integration concept of IntenCD and DoseMapper in a production environment. We implement the feed-forward concept by feeding IntenCD inspection data into DoseMapper that is connected to ASML's TWSINCAN^TM XT:1900i scanner. We apply this concept on printed wafers and demonstrate significant reduction in intra-field CDU. This concept can effectively replace the feedback concept using send-ahead wafers and extensive CDSEM measurements. The result is a significant cost saving and fab productivity improvement. By routinely monitoring mask-based CDU, we propose that all photo-induced transmission degradation effects can be compensated through the same mechanism. The result would be longer intervals between cleans, improved mask lifetime, and better end of line device yield.

Citation Download Citation

Shmoolik Mangan, Erik Byers, Dan Rost, Mike Garrett, Merri Carlson, Craig Hickman, Jo Finders, Paul Luehrmann, Robert Kazinczi, Ingrid Minnaert-Janssen, Frank Duray, Baukje Wisse, Nicole Schoumans, Liesbeth Reijnen, Thomas Theeuwes, Michael Ben-Yishai, Rachel Ren, Ryan Gibson, Lior Shoval, Yaron Cohen, Yair Elblinger, and Ilan Englard "Novel lithography approach using feed-forward mask-based wafer CDU correction increase fab productivity and yield", Proc. SPIE 7272, Metrology, Inspection, and Process Control for Microlithography XXIII, 72722B (23 March 2009); https://doi.org/10.1117/12.815415

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available