OPC simplification and mask cost reduction using regular design fabrics

Tejas Jhaveri; Ian Stobert; Lars Liebmann; Paul Karakatsanis; Vyacheslav Rovner; Andrzej Strojwas; Larry Pileggi

doi:10.1117/12.814406

16 March 2009 OPC simplification and mask cost reduction using regular design fabrics

Tejas Jhaveri, Ian Stobert, Lars Liebmann, Paul Karakatsanis, Vyacheslav Rovner, Andrzej Strojwas, Larry Pileggi

Proceedings Volume 7274, Optical Microlithography XXII; 727417 (2009) https://doi.org/10.1117/12.814406
Event: SPIE Advanced Lithography, 2009, San Jose, California, United States

Abstract

Cost and complexity associated with OPC and masks are rapidly increasing to the point that they could limit technology scaling in the future. This paper focuses on demonstrating the advantages of regular design fabrics for OPC simplification to enable scaling and minimize costs for technologies currently in volume production. The application of such a simplified OPC flow results in much smaller mask data volumes due to significantly fewer edges compared to the conventional designs and OPC flows. Moreover, the proposed approach enables reduced mask write times, hence lower mask costs. We compare OPC performance and complexity on standard cell designs to that of layouts on a regular design fabric. We first demonstrate advantages and limitations within an industrial model-based OPC solution. Then, a simplified rulebased OPC solution is discussed for the Metal 1 layer. This simplified OPC solution demonstrates a 70X run time improvement and an order of magnitude reduction in both the output edge count per unit shape and shot count per unit shape while maintaining the printabalility advantages of regular design fabrics. The simplified OPC also demonstrates a 50% reduction in mask-write time. Finally, the benefit of regular design fabrics for OPC simplification and mask cost reduction at a 32nm node is discussed.

Citation Download Citation

Tejas Jhaveri, Ian Stobert, Lars Liebmann, Paul Karakatsanis, Vyacheslav Rovner, Andrzej Strojwas, and Larry Pileggi "OPC simplification and mask cost reduction using regular design fabrics", Proc. SPIE 7274, Optical Microlithography XXII, 727417 (16 March 2009); https://doi.org/10.1117/12.814406

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available